Table of Contents
Advertisement
Quick Links
Index
Page Question
(1)
Index
(2)
How do I know when I go out of range with the CS60, and do I lose the call?
(3)
How do I change the battery on my CS60
What do the lights on the CS60 indicate ?
(4)
Is there any radiation risk when using a CS60 ?
How Many CS60's can I use in one environment ?
Why is my headset buzzing ?
(5)
My CS60 headset does not work with the charging base station ?
What type of audible warnings does the CS60 use ?
(6)
Why is my headset Beeping ?
I hear echo/side tone on my CS60, what should I do ?
How do I reset/resubscribe the CS60 top (new headset) ?
(7)
How long can I use my office headset before charging the battery ?
(8)
CS60 FACT SHEET
Page 1
Advertisement
Table of Contents
Related Manuals for Interquartz CS60
Summary of Contents for Interquartz CS60
- Page 1 How do I adjust the volume on a CS60 (receive and transmit) How do I know when I go out of range with the CS60, and do I lose the call? Do I need to replace the battery in my CS60...
- Page 2 Answer The CS60 automatically detects when you are about to go out of range and provides you with a warning beep in the headset. If you go out of range, the call is placed on hold until you return back into range.
- Page 3 Question: Do I need to replace the battery in my CS60 Answer If your headset does not turn on (no green light), then your battery has no charge. Place your headset on the charging base, and look for the base's amber light. If the amber light blinks, then your headset needs to charge.
- Page 4 Is there any radiation risk when using a CS60? Answer The CS60 is a DECT based product and complies with European safety standards for transmit output power. The average output power of the CS60 is around 500 times lower than that from a mobile telephone.
- Page 5 My CS60 headset does not work with the charging base station. Answer If your CS60 headset is not working with the charging base station, please follow the checks below to help resolve the problem. Check that the phone is connected to the charging base station correctly by making sure that all cable a well connected and will not fall out of the connection port.
- Page 6 Press the talk button on the headset to answer the call. Question : I hear echo/side tone on my CS60, what should I do ? Answer: Echo is usually caused by the transmit (speak) level on the unit being set too high. First, try lowering the volume of the telephone.
- Page 7 Question How do I reset/resubscribe ? Answer NOTE: Before re-subscribing the system, make sure the IntelliStand switch (on the right side of the charging base) is in the "_" position and NOT the "=" position. To Re-Subscribe: The headset and the base unit are supplied subscribed to each other. However, if you wish to use a replacement headset with the base unit (or if you lose your connection to the base unit), then you must re-subscribe as follows: 1.
- Page 8 How long can I use my office headset before charging the battery ? Answer The CS60 headset will work for approximately eight hours after a full charge. If you find the headset stops working or the levels become unstable after 1-2 hours then that usually signifies the battery needs replacing.
Need help?
Do you have a question about the CS60 and is the answer not in the manual?
Questions and answers