Page 1
Polaris Turbo S (18-On) 30” OnX6+/S8 Roof Mount kit 185 Bosstick Boulevard • San Marcos • CA • 92069 Phone 760-560-2252 x3 • Fax 760-560-0383 info@bajadesigns.com • www.bajadesigns.com...
Page 2
LIMITED LIFETIME WARRANTY Baja Designs proudly offers a LIFETIME WARRANTY against manufacturer’s defect on all the products that we manufacture. These are comprehensive warranties; other than the exclusions below – you’re covered. If your LED or HID bulb burns out, you’re covered. Additionally, cutting off our connector or changing your lenses does not automatically void your warranty.
Page 3
Polaris Turbo S Roof Mount Kit Tools Required 7/16” wrench T40 Torx bit 10mm Socket wrench 1. Mounting: Remove the two circled T40 bolts and remove washers. Use provided washers. Roof spacers under each bolt 2. Thread the T40 bolts from step 1 through the roof mounting brackets and tighten.