Specifications - Carl Martin Octa-Switch II Manual

Specifications

Input..................................... 500K Ohm (buffer)
Output.................................... 560 Ohm (buffer)
S/N Ratio................................... 70 dB
Loops......................................... 8 pcs. true bypass relay
Presents.................................... 8 pcs via DIP switch
External switch.......................... 2 pcs (latching)
Dimensions .............................. 510 (W) x 135 (D) x 55 (H) mm
Weight....................................... 2,3Kg/ 5,14lbs
Warning: to Reduce the risk of fire or shock, do not expose the Carl Martin Octa-Switch to rain or moisture
and do not install it near any heat sources. Protect all wires and plugs from damage, and unplug the unit
when not in use. Please do not attempt to remove screws or covers; refer all servicing to a qualified service
technician.
Warranty: Carl Martin Research warrants the manufacturing, material and proper operation for a period of
one year from date of purchase. Carl Martin will replace defective parts, make necessary repairs or replace
the unit at the discression of our technicians. The warranty applies only to the original purchaser of this
product, and excludes any damage or faulty operation resulting from misuse, neglect or unauthorized
service.
East Sound Research
20,06" (W) x 5,31" (D) x 2.16" (H)
Raadmandsvej 24
Power Requirements
Battery: The Octa-Switch MKII requires two 9V
batteries. To replace the batteries, carefully remove
the battery lids on the back, install the new batteries
and then re-install the lids.
Power consumption: max. 380 mA
Power supply: 9 V DC (regulated), 500 mA
minimum, 2.1 mm female plug, center negative (-)
ATTENTION: Please Use DC Power Supply Only!
Failure to do so may damage the unit and void the
warranty.
8500 Grenaa Denmark info@carlmartin.com