Filisia Cosmo Manual

Download this manual

Cosmo Manual

Filisia Interfaces

71-75 Shelton Street

London, WC2H 9JQ

+44 (0)20 8133 4220

hello@ﬁlisia.com

www.ﬁlisia.com

About

Cosmo is a unique, customisable bluetooth switch that 

(a) works with the Cosmo iOS app to give access to numerous

training and learning activities.

(b) provides single or multiple switch access to devices such as

laptops, mobile phones and tablets running that are Bluetooth LE

compatible and run iOS, OS X, Windows, and Android, Linux

operating systems.

Usage within the EU

This product can be used across EU member states.

Cosmo Switch

Charging port

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

FCC Note 1

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

Power Button

Label & serial number

Mounting system

screw holes

Cosmo Tech Specs and User Manual p.1

Page 1 Cosmo is a unique, customisable bluetooth switch that  This device complies with part 15 of the FCC Rules. Operation is (a) works with the Cosmo iOS app to give access to numerous subject to the following two conditions: (1) This device may not training and learning activities.
Page 2: Battery Charging
The Cosmo Switch is powered by an internal rechargeable battery. Charge the Cosmo Switch to full power before using. FRN: 0028715027, Grantee code 2AT9O Technial speciﬁcations To charge: Switch Type: Mechanical  ...
Page 3 Advanced Settings in your iOS device device and click “Pair”. 3. To turn oﬀ your Cosmo device, keep the power button at the 4. Set up any settings for switch access within the app you will bottom of the devices pressed for 3 seconds. The device lights be using with your Cosmo switch.
Page 4 Cosmo serial number on the switch and click “Unpair” or “Forget”(exact terminology depends on your operating system). Note: If your app does not work with your selected HID character, try another character. If you cannot ﬁnd which character works, contact your app developer to determine the keystrokes being used.
Page 5 Colour/HID characters for using the Cosmo switch as a Bluetooth controller Colour Pattern Value Slow on/oﬀ ––__––__ Blue Space Green Enter Yellow Arrow Up Orange Arrow Down Arrow Left Purple Arrow Right Fucchia Turqoise Space - less sensitive Rose Enter - less sensitive Fast on/oﬀ...