Neocraft My Pet Companion Portable Pet Kennel Quick Start Manual

Congratulations on your purchase of My Pet Companion, the ideal choice for pets and
their parents! My Pet Companion portable pet kennel is a spacious, attractive and secure
playground for pets. Permanently-hinged sturdy side panels and steel roof rods make it
the fastest, no-tools assembly on the market today. Just snap-and-go!
Contents (15 Total Separate Pieces):
1. Permanently-Hinged, Hexagon-Shaped Kennel including attached roof rods and
double door gate panel (1)
Step #1
Unfold and Connect
● Unfold the pre-connected kennel panels into the basic 6 sided hexagon shape, making
sure the roof rod triangles are on the outside of the kennel panel assembly.
● Once in this basic shape locate the pin end and the receiving end of the kennel panel
assembly and connect the two by dropping the pin in the receiver. (As shown in Figure
1.)
Step #2
Panel Feet
Insert the panel feet onto the bottom of each of the 6 sides of the
kennel panels. The panel feet are designed to keep the correct
angle of the 6 sided hexagon shape as well as protect the panel
legs. (As shown in Figure 2.)
2. Roof Hub with Cap (1)
3. Reversible All-Season Cover (1)
4. Side Panel Connectors (feet) (6)
5. Elastic tie-downs (6)