Advertisement
Lay out your Rekliner with
the seat rods on the
underside.
Place your mattress
inside the zippered sleeve
ensuring that any corner
valves are located at the
top left corner. This allows
air to be expelled from the
mattress as you roll it up
for transport or storage.
Inflate your matrress and
zip the sleeve closed,
ensuring the zip sliders
are placed next to the
valve for easy access.
The foot canopy can
be used to protect your
sleeping bag foot box
from touching icy or
damp tent walls.
Connect side buckles
to deploy the chair. Adjust
straps as needed.
Rods can be removed
through an opening in the
rod sleeve.
1
2
3
REKLINER
INSTRUCTIONS
Regular
Large
Advertisement
Table of Contents
Summary of Contents for Ice-Trek REKLINER
- Page 1 REKLINER INSTRUCTIONS Regular Large Lay out your Rekliner with the seat rods on the underside. Place your mattress inside the zippered sleeve ensuring that any corner valves are located at the top left corner. This allows air to be expelled from the mattress as you roll it up for transport or storage.
- Page 2 For transporting leave your mattress inside Rekliner and carry folded in thirds, half or unfolded. The more folds, the more air needs to be expelled from your mattress. Use the straps to secure the folds. Rekliner can be rolled up either empty or with the deflated mattress inside.
Need help?
Do you have a question about the REKLINER and is the answer not in the manual?
Questions and answers