Setting Up Tv Channels; Scanning For Tv Channels; Skipping Channels - Vizio V Series User Manual

Hide thumbs Also See for V Series:
Table of Contents

Advertisement

SETTING UP TV CHANNELS

You can use the TV's Channels menu to:
TV Channels
Find channels
Find Channels
Find new channels
Find New Channels
Select channels to skip
Skip Channel
Analog Audio
Select analog audio mode
Digital Audio
Select the language for digital audio
Parental Controls
Set parental controls

Scanning for TV Channels

The TV may need to scan for channels before it can display programs and their
associated information. A channel scan is required for free over-the-air channels
(using an antenna) and cable channels from an out-of-the-wall connection (without a
cable box). Moving the TV to an area with different channels requires the TV to scan
for channels again.
Stereo
English
To perform an Auto Channel Scan:
Menu
>
TV Channels
>
Find
Channels
Wait until the channel scan is 100% complete.
Highlight Done and press OK.
If the channel scan is canceled, the
channels that were already discovered are
retained.
To perform a New Channel Scan:
Menu
>
TV Channels
>
Find New Channels
A New Channel Scan saves the current channel map and scans for additional
channels.

Skipping Channels

After a channel scan is completed, you may find that some channels are too weak to
watch comfortably. There may also be some channels you do not want to view. You
can remove these channels from the TV's memory with the Skip Channel feature.
WARNING: Channels that have been removed with the Skip
Channel feature can still be viewed if the channel is entered using
the number pad.
Find Channels
If you wish to completely block a channgel from being viewed, use
Channels Found
see Locking and Unlocking Channels on page 18.
Digital
8
Analog
12
45% Complete
To remove a channel:
1.
From the TV CHANNELS menu, highlight
Skip Channel, and press OK. The SKIP
CHANNEL menu is displayed.
2.
For each channel you wish to remove, use
the Up/Down Navigation buttons on
the remote to highlight the channel and
P
press OK. A
appears to the right of each
channel you select.
3
Skip Channel
0
Test 0
1
Test 1
2
Test 2
3
Test 3
4
Test 4
16

Advertisement

Table of Contents
loading

Table of Contents