Advertisement
Table of Contents
Congratulations on your purchase from Lacewing! Now,
let's set it up ready to press your favourite fruit!
Parts List：
A (Stand and juice collecting bowl)
C (Pressure Plate)
Fx2 (Wooden Plate)
Instruction Manual - Fruit Presser
B (Press Handle)
Dx2 (Hoop)
G (Wooden Plate)
E (Pressing Cage)
Hx2 (Wooden Cross Bar)
Advertisement
Table of Contents
Summary of Contents for Lacewing EasyPress
- Page 1 Instruction Manual - Fruit Presser Congratulations on your purchase from Lacewing! Now, let’s set it up ready to press your favourite fruit! Parts List： A (Stand and juice collecting bowl) B (Press Handle) C (Pressure Plate) Dx2 (Hoop) E (Pressing Cage)
- Page 2 I (Plastic Ring) Jx3 (Juice Bag) K (Stainless Steel Screw) L (Centre Rod) M (Centre Rod) Assembly： Part D and Part E, before being assembled, all metal hoops with bevel edge should be set in one direction whilst the smooth edge must be in-line on the opposite side. Part E should be attached to the inner side of the metal hoops.
- Page 3 3. Part L and Part M should be assembled first, then to be screwed to A 4. P the assembled pressing cage with bevel edge upwards on the assembled pressing stand (Part A) and cover with a juice bag (Part J). 5.
Need help?
Do you have a question about the EasyPress and is the answer not in the manual?
Questions and answers