Advertisement
13
REMOTE CONTROL A-B SELECTION
To separate using of remote control for each indoor unit in
case of 2 air conditioners are installed nearly.
Remote Control B Setup.
1. Press RESET button on the indoor unit to turn the air
conditioner ON for Hi-wall type or press and hold MODE
button on the indoor unit more than 20 seconds for
Bi-flow console type. (Please follow the instructions in the
air conditioner owner's manual.)
2. Point the remote control at the air conditioner.
3. Push and hold
the tip of the pencil. "00" will be shown on the display.
(Picture 1)
4. Press
during pushing
display and "00" will disappear and the air conditioner will
turn OFF. The Remote Control B is memorized.
(Picture 2)
Note: 1. Repeat above step to reset Remote Control to be A.
2. Remote Control A has not "A" display.
3. Default setting of Remote Control from factory is A.
1
POWER-SELECTION AND SILENT
14
OPERATION (OUTDOOR UNIT)
Power-Selection (
)
This function is used when the circuit breaker is shared with
other electrical appliances. It limits the maximum current
and power consumption to 100%, 75%, or 50% and can be
implemented by POWER-SELECTION. The lower percentage,
the higher saving and also longer compressor lifetime.
Note:
• When the level is selected, POWER-SEL level flashes on
remote LCD display for 3 seconds.
In case of 75% and 50% level, number "75" or "50" also
flashes for 2 seconds.
• Due to the reason that POWER-SELECTION function
limits the maximum current, inadequate cooling or
heating capacity may occur.
Silent Operation (
)
Keep outdoor unit operating silently to ensure either yourself
or neighborhood will have a tight sleep in nighttime. By this
feature, the heating capacity will be optimized to deliver such
silent experience. The silent operation can be selected from
one of two purposes (Silent 1 and Silent 2).
There are three setting parameters: Standard level > Silent 1
> Silent 2
Silent 1:
Though operating silently, the Heating (or Cooling) capacity
is still prioritized to ensure having sufficient comfort inside the
room.
This setting is a perfect balance between the Heating
(or Cooling) capacity and the Sound level of outdoor unit.
Silent 2:
Compromising the Heating (or Cooling) capacity to the Sound
level in any circumstance where the outdoor unit's sound level
is highly prioritized.
This setting has a purpose to reduce the maximum sound level
of outdoor unit by 4 dB(A).
button on the Remote Control by
. "B" will show on the
2
Note:
• While activating of Silent operation, inadequate heating
(or cooling) capacity may occur.
Power-Selection and Silent Operation (Outdoor Unit)
[100%]
15
WEEKLY TIMER OPERATION
How to set WEEKLY TIMER
1. Press
setting.
2. Press
sequence.
The sequence of day symbol appears on the
LCD.
3. Press
• The program 1 is ready for setting while
LCD.
• Press
number in the sequence program 1 to
program 4.
4. Press
time.
• The time can be set between 0:00 and 23:50
in 10 minute intervals.
• Press and hold the button to change setting
time for 1 hr.
• Only one of ON or OFF timer can be set on
each program.
ON timer display
* OFF timer is used to stop the air conditioner
only. The display does not show Operation
mode, Temperature, Fan speed and others.
3
[75%]
[50%]
SILENT#1
SILENT#2
to enter WEEKLY TIMER
Blink
to select desired day in
SU
MO
TU
WE
TH
FR
SA
WEEKLY SUMO
TUWETHFRSA
(All day)
to select the program number.
is pressed PG-1 appears on the
to change the program
PG-1
PG- 2
PG-
3
PG-
4
or
to select the desired
OFF timer display*
Advertisement
