Asus Pro H410M-C Manual page 12

1.2.1 Layout contents
1. CPU socket
The motherboard comes with a surface mount Intel
Intel Core , Pentium
® TM
For more details, refer to Central Processing Unit (CPU).
2. DDR4 DIMM slots
The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR4
(Double Data Rate 4) memory modules.
For more details, refer to System memory.
3. Expansion slots
This motherboard supports one PCIe 3.0 x16 graphics card and one PCIe 3.0 x1 network
card, SCSI card and other cards that comply with the PCI Express specification.
The PCI slots support cards such as LAN cards, SCSI cards, USB cards, and other cards
that comply with PCI specifications.
4. Fan headers
The Fan headers allow you to connect fans to cool the system.
5. Power connectors
These Power connectors allow you to connect your motherboard to a power supply. The
power supply plugs are designed to fit in only one orientation. Find the proper orientation and
push down firmly until the power supply plugs are fully inserted.
Ensure to connect the 8-pin power plug.
•
•
•
6. M.2 Slot (Key M)
The M.2 slot allows you to install an M.2 device such as an M.2 SSD module.
•
•
1-2
Gold and Celeron
®
For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12V Specification 2.0 (or later version) and provides a
minimum power of 350 W.
We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
If you are uncertain about the minimum power supply requirement for your system, we
recommend you to refer to online resources for Power Supply Wattage Calculator.
M.2 slot (Key M), type 2242/2260/2280 (supports PCIe 3.0 x2 & SATA modes).
When a device in SATA mode is installed on the M.2 socket, SATA6G_2 port cannot
be used.
Socket LGA1200 designed for 10
®
Processors.
®
Chapter 1: Product introduction
Gen
th