Instructions for use MINItech cart 5050 Contents Contents 1 User instructions............................. 5 1.1 User guide ............................. 1.1.1 Abbreviations ..........................5 1.1.2 Symbols ............................ 5 1.1.3 Target group ..........................5 1.2 Service..............................1.3 Warranty terms and conditions ......................1.4 Transport and storage ........................... 1.4.1 Currently valid packaging regulations ..................
Page 4
Instructions for use MINItech cart 5050 Contents 6 Cleaning and care ............................27 6.1 Cleaning..............................27 6.2 Care ............................... 27 6.2.1 Servicing the drawer ......................... 27 7 Safety checks in accordance with VDE 0701-0702..................28 8 Troubleshooting.............................. 29 4 / 32...
Instructions for use MINItech cart 5050 1 User instructions | 1.1 User guide 1 User instructions 1.1 User guide Requirement Read these instructions prior to first use to avoid misuse and prevent damage. 1.1.1 Abbreviations Abbre- Explanation viation Instructions for use (IfU) MA (AI) Assembly instructions TA (TI) Technician's instructions...
12 months from the date of purchase as confirmed by the salesperson. In case of justified complaints, KaVo will honour its warranty with a free replacement or repair.
Art. 28). Outside Germany Note KaVo shall not be held liable for damage arising from transportation. The shipment must be checked on arrival. If the packaging is visibly damaged on delivery, please proceed as follows: 1. The recipient of the package must record the loss or damage on the delivery re- ceipt.
Page 8
Instructions for use MINItech cart 5050 1 User instructions | 1.4 Transport and storage Transport upright with the arrows pointing upwards! Fragile - protect against impact! Protect from moisture! Permissible stacking load Temperature range Humidity Air pressure 8 / 32...
Instructions for use MINItech cart 5050 2 Safety | 2.1 Description of safety instructions 2 Safety 2.1 Description of safety instructions 2.1.1 Warning symbol Warning symbol 2.1.2 Description of hazard levels Safety instructions distinguishing between three hazard levels are used in this docu- ment to prevent personal and property damage.
Any waste which is generated must be recycled or disposed of in strict compliance with all applicable national regulations in a manner which is safe both for people and the environment. If you have any questions regarding proper disposal of the KaVo product, please contact the KaVo branch. 2.2.2 Product-specific WARNING Injury or damage from damaged functional parts.
IfU SMARTair mobile / SMARTair Evo mobile 2.3 Purpose – Intended use 2.3.1 General information In combination with KaVo control units, this KaVo product is suitable for the pro- cessing of materials in dentistry, industry and trade applications by means of rotating tools.
It may not be used on the patient. Note The device may not be used for a different purpose or for a purpose that goes bey- ond the original purpose. KaVo is not liable for any arising damage. 12 / 32...
Instructions for use MINItech cart 5050 3 Product description | 3.1 MINItech cart 5050 3 Product description 3.1 MINItech cart 5050 Storage area ① Surface tops ② Suction drawer for handpiece, pneu- matic hand-held nozzle and face shield ③ Drawer for materials ④...
Instructions for use MINItech cart 5050 3 Product description | 3.2 Rating plates Rear ① Microswitch attachment ② Back wall ③ Magnet 3.2 Rating plates 100V rating plate 115V rating plate 650W 230 V rating plate Type Device type MINItech cart 5050 14 / 32...
Instructions for use MINItech cart 5050 3 Product description | 3.3 Scope of delivery Year of manufacture – serial number Material number CE mark Fuses For disposal instructions see: Intended use Please note accompanying documents and safety instructions HIBC Code 3.3 Scope of delivery ▪...
Page 16
Instructions for use MINItech cart 5050 3 Product description | 3.4 Technical data Load - storage areas Max. load of the drawers 10 kg Max. load of the storage areas 20 kg Electrical system Device input power SMARTair/K5 (nom- 650 W inal power) Supply voltage AC 100 V / 115 V / 230 V...
MINItech cart 5050. CAUTION Improper mains voltage settings. Damage to the product. ▶ Only professionals or technicians trained by KaVo are permitted to set the mains voltages. 4.2.1 Setting the country-specific mains voltage on the SMARTair mobile / SMARTair Evo mobile Note Make sure that the set voltages correspond with the information on the rating plate.
Instructions for use MINItech cart 5050 4 First use | 4.3 Connect the pneumatic hand-held nozzle 4.2.2 Remove the drawer ▶ Pull out the drawer ② to the stop, lift the front and remove it. ▶ Pull out the drawer ① to the stop. 4.3 Connect the pneumatic hand-held nozzle ▶...
Instructions for use MINItech cart 5050 4 First use | 4.4 Connecting the K5plus handpiece 4.4 Connecting the K5plus handpiece ▶ Put down the K5 handpiece ① on the left (right-handers) or right (left-handers). ▶ Put down the connection cable ⑥ behind the suction system drawer ⑤. ▶...
Page 20
Instructions for use MINItech cart 5050 4 First use | 4.5 Connecting the SMARTair mobile / SMARTair Evo mobile ▶ Insert the connecting cable for the control ① (already connected to the K-Control TLC unit) into the dedicated connector ② of the SMARTair mobile / SMARTair Evo mobile.
Instructions for use MINItech cart 5050 4 First use | 4.6 Connect the suction hose 4.6 Connect the suction hose ▶ Place the SMARTair mobile / SMARTair Evo mobile ② all the way in the back of storage area ③. Make sure that the suction hose ① is not pinched. ▶...
Instructions for use MINItech cart 5050 4 First use | 4.8 Insert the drawer ▶ Insert the suction system drawer ① all the way and make sure that no lines are pinched. ▶ Use a second cable tie ④ to affix the connection lines to the suction hose. If ne- cessary, pull on the lines to make sure that they are not taut.
Page 23
Instructions for use MINItech cart 5050 4 First use | 4.9 Connect the compressed air ▶ Connect the pneumatic connection hose ④ to the pressure line of the compressor feed line. Lengthen, if necessary. ▶ Check if the power switch ⑤ of the SMARTair mobile / SMARTair Evo mobile is in the "ON"...
Instructions for use MINItech cart 5050 5 Operation | 5.1 Move the suction system drawer into working position 5 Operation 5.1 Move the suction system drawer into working position Note The system is powered after the suction system drawer is pulled out. ▶...
Instructions for use MINItech cart 5050 5 Operation | 5.4 Change the filter ▶ After your workday, always turn off the power. For this purpose, insert the suction system drawer all the way to the limit stop. ð This renders the entire MINItech cart 5050 current-less. 5.4 Change the filter ▶...
Page 26
Instructions for use MINItech cart 5050 5 Operation | 5.4 Change the filter See also: 2 IfU SMARTair mobile / SMARTair Evo mobile 26 / 32...
Instructions for use MINItech cart 5050 6 Cleaning and care | 6.1 Cleaning 6 Cleaning and care 6.1 Cleaning ▶ If dirty, clean the MINItech cart on the outside with a soft cloth and lukewarm wa- ter. 6.2 Care 6.2.1 Servicing the drawer The drawers are provided with the required lubricants by the manufacturer.
▪ the applicable accident prevention regulations. The overarching guidelines and/or national laws, national regulations and the rules of technology applicable to the startup and use of the KaVo product for the intended pur- pose are to be applied and complied with.
Instructions for use MINItech cart 5050 8 Troubleshooting 8 Troubleshooting DANGER Electrical power. Risk of fatal injury. ▶ Have the electrical part of the device repaired and serviced only by professionals or persons trained at the factory who have been advised of the safety instructions. ▶...
Need help?
Do you have a question about the MINItech 5050 and is the answer not in the manual?
Questions and answers