Advertisement
2. Press and hold the power button on the wireless remote.
3. While pressing the power button apply power to the spotlight.
4. After a few seconds you will hear the relay click and the light will turn on.
5. When the light turns on the paring is complete, release power button.
If the handheld remote will not pair with the spotlight, follow the instructions
below to verify the spotlight is functioning properly.
1. Turn off all power to the spotlight.
2. Connect the yellow and purple wires from the base of the spotlight together.
3. While the yellow and purple wires are connected, apply power to the spotlight.
4. After a few seconds the spotlight will begin to sweep.
If the spotlight sweeps, replace the battery in the handheld remote. If the
spotlight does not sweep, check all connections to the spotlight.
Advertisement
