Page 3
Wiring diagram ............................... 5 Technical specifications ..............................6 Trouble shooting ................................6 Tank sensor is not visible on PICO ......................... 6 Tank sensor is showing the same liquid level for long time ..................6 Tank sensor is showing empty tank ........................6 ST107...
1 Introduction Simarine’s ST107 Digital tank module is a highly versatile module. Its main purpose is to measure any liquid level. But it can be used to measure voltage, current or temperature. ST107 Digital tank module can measure liquid level such as water, waste water, fuel or any other liquid. It comes with 4 integrated resistance sensing inputs operating from 0 ohm - 65 kohm and 3 integrated voltage sensing inputs, operating from 0 V - 35 V DC.
2x2x0.25 mm2 Twisted pair (recommended) 4.3 Connecting For proper function of Simarine’s ST107 digital tank module it is necessary to take the following steps: Connect ST107 Digital Tank module to Simarine’s PICO via the SiCOM port. Connect any compatible tank or temperature sensors to ST107 via the resistance or voltage sensing input. * Connect the alarm contact to execute specific operation on an alarm.
Alarm contact Table 1Technical specifications * Maximal number of connected tank sensors to one ST107 digital tank module. This includes 4 resistance and 3 voltage sensing inputs, which excludes connecting any temperature sensor. ** Maximal number of connected temperature sensors to one ST107 digital tank module, which excludes connecting any tank...
Page 7
Verdrahtungsdiagramm ............................9 Technische Einzelheiten ..............................10 Fehler Beseitigung ................................10 Tank Sensor ist nicht sichtbar auf dem PICO ....................... 10 Tank Sensor zeigt den gleichen tank stand für längere zeit ................... 10 Tank Sensor zeigt einen leeren tank ........................10 ST107...
Page 8
Bereich betriebenen Tank- oder Temperatursensor anschließen. ST107 features also a configurable alarm contact to fire, on specific alarms. It can handle max. current 1A on max. 30 V DC. The alarm is configurable via PICO’s menu.
Page 9
4.2 Verdrahtung Für die ordnungsgemäße Funktion des Simarine ST107 Digital Tank Module sind Folgende Schritte notwendig: Verbinden Sie den ST107 über den SICOM-Anschluss mit Simarine PICO. Verbinden Sie jeden kompatiblen Tank oder Temperatursensor über den Widerstand oder Spannung Eingang mit dem ST107.
Ist kein Tank Sensor sichtbar auf dem PICO, überprüfen Sie Folgendes: Ist der ST107 ordnungsgemäß über den SICOM-Anschluss mit dem PICO verbunden. Wenn Sie Ihr eigenes Kabel für den SICOM Daten Transfer benutzen, Stelen sie sicher, dass sie den Richtigen Kabel typ benutzen.
Page 11
Accessory main switch SiCOM + 12V SPLITTER Common to another SiCOM port SiCOM ST107 0 - 65kOHM 0 - 35V DC TANK with VOLTAGE TANK with RESISTANCE level sensor level sensor (0-35V DC) (0-65kOHM) NC NO TEMPERATURE sensor NTC 10kOHM -15+90°C...
Need help?
Do you have a question about the ST107 and is the answer not in the manual?
Questions and answers