Related Manuals for Extreme Tools EX7201HCBK
Summary of Contents for Extreme Tools EX7201HCBK
- Page 1 Painted Steel Hutch Manual EX7201HCBK EX7201HCBL Extreme Tools Inc. 740 Frontenac Road Naperville, IL 60563 630-369-9303...
-
Page 2: Parts List
Parts List Ref # Description Part # Trim 315003 The keys are taped to Middle Shelf 111479 the inside of the hutch. Door 111472 Lock and Key (K98) 304036 Replacement keys may be ordered using the code Door Pull 301059 that appears on the face Roller 327015... - Page 3 Assembly Shelf Installation Place the shelf at the desired height. Insert the M6 x 12 hex bolts into the holes in the side panels. Tighten securely.
- Page 4 Hutch Door Removal Open the door, loosen the M4 x 12 Phillips pan head on the hinge and remove the door. M4x12 Phillips Pan Head Remove the shelf and the shelf brackets by loosening the M6 x 12 hex bolts. Shelf M6x12 hex bolt Shelf bracket...
- Page 5 Loosen the M6 x 12 hex bolts and washers on the top, then take out the slides and sliding panel. slide M6x12 hex bolt washer sliding panel Remove the slides from the sliding panel by loosening the M8 bolts. roller spring washer M8 bolt...
- Page 6 Hutch Door Replacement Connect the slides with the sliding panel by tightening the rollers, the spring washers and the M8 bolts. roller spring washer M8 bolt Put the connected sliding panel into the hutch. slide sliding panel Tighten the M6 x 12 hex bolts and washers through the inside of the top. Make sure all the holes are lined up.
- Page 7 Put the left and right inner side panels on either side of the hutch. Fasten the blind rivets through the holes on the front and back. inner side panel front Φ4.8x10 blind rivets back Connect the shelf to the shelf bracket using the M6 x 12 hex bolts and tighten securely.
-
Page 8: Operation
Slide the door into the hutch. Door Connect the door to the hutch by fastening the M4 x 12 Phillips pan head to the hole on the hinge. Close the door. M4x12 Phillips Pan Head Operation Maintenance Periodically clean the door fronts, trim and other surfaces with mild detergent and water. - Page 9 Safety WARNING Lock the door before moving this product. The door could come open and make the product unstable and tip, which may cause personal injury or product damage. DO NOT stand or lean on this product. DO NOT mount this product on a truck bed or any other moving object. This may cause personal injury or product damage.
Need help?
Do you have a question about the EX7201HCBK and is the answer not in the manual?
Questions and answers