Do you have a question about the HIK 78-T and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Hodedah HIK 78-T
Page 1
HODEDAH Assembly Instructions 2 people This instruction booklet contains important safety information, please read and keep for future reference. 70 mins ITEM # HIK 78-T (MOP) 1 YR LTD KITCHEN CART 1 Box FRONT VIEW REAR VIEW Product Dimensions : Height 35.3'' x Width 43.7'' x Depth 15.6'' 1 | Page www.Hodedah.com...
Page 2
WARRANTY Hodedah warrants this product to be free from defect in materials and workmanship and agrees to remedy and such defect. This warranty covers one year from the date of original purchase. This is solely limited to replacement of defective parts and no assembly for labor is included.
Page 3
HODEDAH Let's get started... Helpful hints, read before beginning assembly Make sure you receive all boxes. if your item is packed in one box, box count will read 1 of 1, likewise if your item is packed in two boxes, box count will read 1 of 2 and second box will read 2 of 2.
Page 4
HODEDAH Hardware List Minifix Nut Minifix Bolt Minifix Cap M8X25MM M4x25MM Handle 108 M6X50MM Metal Piece NAIL 5/8 3.5KG Magnet (1 Hole) Allen Key M3X12MM MT Stopper M4X38MM Shelf Support M3.5X16MM Chrome Pipe Drawer Slide 14'' Caster Caster Drawer Slide 14''...
Page 6
HODEDAH The Breakdown... I) Main Unit : II) Door & Drawer : 6 | Page www.Hodedah.com...
Page 7
HODEDAH Step 1 WOOD DOWEL M8x25MM MINIFIX BOLT BOTTOM VIEW 1. Insert 22 x wood dowels (B) in panel (1,2,3,4,5 & 6). Using hammer to gently tap them in. 2. Tighten 4 x minifix bolt (A2) into panel (7) with screwdriver.
Page 8
HODEDAH Step 2 DRAWER SLIDE ''14 CB SCREW M3.5X16MM LEFT VIEW RIGHT VIEW 1. Place the drawer slide (M1) onto 3 holes area as shown at right view panel (2). Then tighten it with 3 x cb screws M3.5x16mm (K).
Page 9
HODEDAH Step 3 HANDLE 108 3.5KG MAGNET (1 HOLE) CB SCREW M4X25MM BOTTOM VIEW 1. Place 2 x handle (C1) to panel (15 & 16) front. After that, tighten 4 x screws (C2) for fix it. 2. Insert 2 x magnets (F2) into panel (6) 's thru holes as shown with plastic hammer.
Page 10
HODEDAH Step 4 SHELF SUPPORT METAL PIECE CB SCREW M3X12MM 1. Fix and tighten 2 x metal piece (F1) by using 2 x screws (F3) at door panel (15 & 16). 2. Insert 4 x shelf support (I) into panel (2 & 5).
Page 11
HODEDAH Step 5 CB SCREW M4X38MM DRAWER SLIDE ''14 CB SCREW M3.5X16MM NAIL 5/8 HANDLE 108 COMPLETED 1. Place 2 x panels (12) next to each side of panel (11 & 13). (As Shown). Then tighten screws (J) from the side of panels (13) with screwdriver.
Page 12
HODEDAH Step 6 ALLEN KEY CHROME PIPE CSK CAP CSK CAP WOOD M6X50MM 1. Put in the chrome pipe (L) to panel (4). Then fix panel (3) by inserting dowels (C) onto non-thru at panel (3) and use allen key (G) to tighten 2 x csk M6x50mm (D) from the thru-holes of panel (4).
Page 13
HODEDAH Step 7 ALLEN KEY CSK CAP CSK CAP WOOD M6X50MM 1. Fix panel (3 & 4) to panel (5) by using dowels (C) onto non-thru at panel (3 & 4) as shown. 2. Then tighten 3 x csk M6x50mm (D) from the thru-holes of panel (5) with allen key (G) .
Page 14
HODEDAH Step 8 ALLEN KEY CHROME PIPE CSK CAP CSK CAP WOOD M6X50MM 1. Put in the chrome pipe (L) to panel (1). Then fix panel (1) to panel (2) by using dowels (C) onto non-thru at panel (1) as shown.
Page 15
HODEDAH Step 9 ALLEN KEY CSK CAP CSK CAP WOOD M6X50MM 1. Place panel (6) to panel (2 & 5) by using dowels (C) onto non-thru at panel (6) as shown. 2. Then tighten 2 x csk M6x50mm (D) from the thru-holes of panel (2 & 5) with allen key (G).
Page 16
HODEDAH Step 10 MINIFIX NUT MINIFIX CAP ALLEN KEY 1. Place panel (7) to panels (2 & 5) by using dowels (C) onto non-thru at panel (2 & 5) as shown and insert 4 x minifix nut (A1) into panel (2 & 5) 's thru-holes with allen key (G) to tighten it.
Page 17
HODEDAH Step 11 MINIFIX CAP CSK CAP WOOD M6X50MM ALLEN KEY 1. Place panel (8) to panel (2 & 5) by using dowels (C) onto non-thru at panel (2 & 5) as shown. 2. To tighten 4 x csk M6x50mm (D) from the thru-holes of panel (8) with allen key (G).
Page 18
HODEDAH Step 12 CB SCREW M3.5X16MM CASTER WITH STOPPER CASTER W/O STOPPER 1. Fix 4 x caster (N1& N2) onto panel (8) 4 side edges by using 16 x screws (K) with screwdriver. 18 | Page www.Hodedah.com...
Page 19
HODEDAH Step 13 NAIL 5/8 1. At face down position, place 2 x panel (10) onto the back of the main unit and align it properly for nailing. Use hammer to nail the nails (E) one by one on the line drawn and at center of 4 side edges.
Page 20
HODEDAH Step 14 1. Slide in the drawer (11) by slotting the rollers at each end of drawer slide (R2) onto the rail of drawer slide (R1) fixed at side panel (2 & 5). 2. Take panel (9) and slide it on the 4 shelf support top as shown.
Page 21
HODEDAH Step 15 Final step... SLOT IN DOOR PANEL 1. Insert 2 x mt stopper (H) into panels (6) bottom side. After that, attach panel (15 & 16) with mt stopper (H) by using 4 x screws (K) . 2. Insert 2 x mt stopper (H) into panel (8) upper side. After that, attach panel (15 &16) with mt stopper (H) by using 4 x screws (K).
Page 22
HODEDAH Job Complete... Enjoy & Thank you for purchasing from Hodedah! 22 | Page www.Hodedah.com...
Page 23
Failure to detach this restraint before moving furniture may result in injury and damage. If the safety kit is not in the box, please contact our consumer service team at Tel. 1 (718) 456 0505 or Email Support@Hodedah.com in order to obtain one before using the furniture.
Page 24
HODEDAH FITTING OF ANTI-TIP SAFETY STRAP STEP 1: Attach the mounting bracket to the furniture in the solid part below the top panel a few inches away from the side of the unit. Screw through the smallest hole of STEP 2:...
Need help?
Do you have a question about the HIK 78-T and is the answer not in the manual?
Questions and answers