System Setting; System Setting Menu; Display; Audio Zone 1 - Hertz marine HMR 20 Owner's Manual

SYSTEM SETTING

9.2

System Setting Menu

- Long press
to access the system settings menu.
- Rotate VOL/SEL knob to highlight one of the available options, press to select.
(DISPLAY>AUDIO ZONE 1>AUDIO ZONE 2>LOW BATTERY ALERT>BEEP>START UP VOLUME>SYSTEM).
- Press
to go back to the previous screen menu.
- Long press
to exit from the system settings menu.

Display

- Rotate VOL/SEL knob to highlight one of the available options, press to select.
(DIMMER>DIMMER BRIGHTNESS>BUTTONS BACKLIGHT COLORS, TEXT SCROLLING)
DIMMER
Press VOL/SEL knob to enable
DIMMER BRIGHTNESS
Press VOL/SEL knob to switch between options:
DIMMER ON: rotate VOL/SEL to adjust brightness level from 0 to 6 when dimmer is enable.
DIMMER OFF: rotate VOL/SEL to adjust brightness level from 0 to 6 when dimmer is disable.
BUTTONS BACKLIGHT COLORS
Rotate VOL/SEL knob to highlight one of the available options, press to select
(RED>GREEN>BLUE>WHITE>ORANGE>PURPLE>CAMBRIDGE BLUE>AUTO)
TEXT SCROLLING (enable continuous text scrolling where available)
Rotate VOL/SEL knob to enable

Audio Zone 1

- Rotate VOL/SEL knob to highlight one of the available options, press to select.
(EQ>TONE>ZONE RENAME>MAX VOLUME LIMIT>SUB LOW PASS FILTER)
EQ (Preset Equalizer Setting)
Rotate VOL/SEL knob to highlight one of the available options, press to select.
(FLAT>CLASS>ROCK>POP>JAZZ>BEAT)
TONE
Press VOL/SEL knob to switch between options:
Bass: rotate VOL/SEL knob to adjust the desired Bass level range from -7 to +7
Treble: rotate VOL/SEL knob to adjust the desired Treble level range from -7 to +7
Balance: rotate VOL/SEL knob to adjust the Balance between the right and left channels from R07 (full right)
to L07 (full left).
ZONE RENAME (to select the desired name for this audio zone to make it easier to identify)
Rotate VOL/SEL knob to highlight one of the available options, press to select.
(BOW>BRIDGE>COCKPIT>FLY>GALLERY>HELM>SALOON>STATEROOM 1
STATEROOM 2>STATE ROOM 3>STERN>TOWER>TRANSOM>ZONE 1>ZONE 2)
MAX VOLUME LIMIT (to limit the maximum volume output of this zone).
Rotate VOL/SEL knob to adjust the desired Volume level from 0 to 40.
SUB LOW-PASS FILTER (to set the subwoofer crossover frequency).
Rotate VOL/SEL knob to highlight one of the available options, press to select
(80Hz>120Hz>160Hz).
12
or disable
this function.
or disable this function.