Precautions - Gardener Denver D807 Service And Repair Manual

Dry bulk truck blower
Table of Contents

Advertisement

SAFETY
SAFETY
SAFETY
SAFETY
SAFETY
PRECA
PRECA
UTIONS
UTIONS
PRECA

PRECAUTIONS

PRECA
UTIONS
UTIONS
• Rotating shafts can be dangerous. You can snag clothes, skin, hair, hands, etc. This can cause serious injury or death.
• Do not work under the vehicle when the engine is running.
• Do not work on a shaft (with or without a guard) when the engine is running.
• Do not engage or disengage driven equipment by hand from under the vehicle when the engine is running.
• In order to avoid becoming entangled, install the power take off and/or shaft behind the frame rail, tanks, battery box, etc.
• If power take off and/or shaft are still exposed after installation, install a guard.
• Install a support strap when servicing a drive shaft to prevent personal injury.
• A serious or fatal injury can occur . . .
if you lack proper training
if you fail to follow proper procedures
if you do not use proper tools and safety equipment
if you assemble driveline components improperly
if you use incompatible driveline components
if you use worn-out or damaged driveline components
if you use driveline components in a non-approved application.
• This manual contains safety instructions. Read, understand and follow this manual.
Get proper training
Learn and follow safe operating procedures
Use proper tools and safety equipment
Use proper components in good condition
Note:
- Blower housing and associated piping or accessories may become hot enough to cause major skin burns on contact.
- Internal and external rotating parts of the blower and driving equipment can produce serious physical injuries.
Do not reach into any opening in the blower while it is operating.
- If blower is operated with piping disconnected, place a strong coarse screen over the inlet and avoid standing in the
discharge air stream.
- Stay clear of the blast from pressure relief valves and the suction area of vacuum relief valves.
- Avoid extended exposure in close proximity to machinery with high intensity noise levels. Wear adequate ear protection.
- Use proper care and good procedures in handling, lifting, installing, operating and maintaining the equipment.
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D907

Table of Contents