Police Body Worn Camera I820 Thanks for choosing our police body worn camera - I820. Hope the camera can help you in the work of law enforcement Product Overview The Police Body Worn camera developed by us has many process technologies such as WIFI/GPS, photography, video and audio recording.
Display Screen Description Basic Operation Description ● Boot Press for 2 seconds, the camera will beep on with a green LED, and the camera turn to standby mode with the screen lighted on. ● Audio recording Short press , the camera will shake, then the LED flash to yellow and the camera start audio recording.
Page 6
frequency. ● Video Recording When the camera is in standby mode, short press , then the camera body will shake with voice Guide Law-enforcement, video recording start, and afterwards the red video light flash on, which indicates the video recording start. Press key again to stop recording, and the camera body will shake again, with red video light off, and the recording is finished and saved.
Page 7
seconds to open laser point light, do it again to turn off. ● Menu selection Short press to set the function and parameter as below in standby mode. ● Resolution: 8 modes of video resolution, 2304x1296 30p/ 1920x1080 30p / 1440*1080 30P/ 1280x720 60p /1280x720 30p / 848x480 60p/ 848*480 30P/ 720*480 30P.
● Delay recording: Delay recording after press stop recording key, delay record 10 seconds video information. ● IR switch: Manual or automatic. ● GPS (optional): Open or Close. ● Vehicle-Mounted: Open Vehicle-Mounted mode, and assemble the camera to the base, one side of data cable connect to mini USB port on the base, the other side connect to USB port of the car.
■ Page Up key Go to menu, press this key can select object to up and left. ■ Focus adjustment function. Long press this key can adjust 8X focus change under standby or video recording mode. Press this key can fast reverse by 2X, 4X, 8X, 16X, 32X, 64X under video recording. (Note: Focus cannot be adjusted under HD 2304*1296 resolution) ■...
Page 10
Press this key to start audio recording, press it again to stop it. One Key Audio Recording Key When the camera is under turn off status, 4 seconds long press this key to start audio recording, press it again to stop it Video Resolution Change Key When the camera is under standby mode, long press this key for 4 seconds, the video resolution can be changed to480 or 720.
Page 11
■ USB port Using cable connect this port with computer to get the file and charge the camera. ■ HDMI port High Definition Multimedia Interface (HDMI) port, use it to connect with HD TV. ■ AV IN port Connect to external camera. Picture and voice from external camera will shows on the screen. ■...
Page 12
● Driver install and computer connection instruction Information read out, calibration, password change, factory reset, up load file, upload path change, camera ID and policeman ID setting all can be changed in the software Driver install and computer connection instruction. ●...