Sony MHC-V73D Help Manual page 59

Make the BLUETOOTH connection from the BLUETOOTH device.
4
When the BLUETOOTH connection is established, the BLUETOOTH device name appears on the display and the
BLUETOOTH indicator lights up.
To cancel the pairing operation
Hold down BLUETOOTH/
To erase pairing information
You can erase all pairing information by resetting the system.
Hint
For details on operating a BLUETOOTH device, refer to the operating instructions supplied with the BLUETOOTH device.
Note
For Apple iOS devices, the system is compatible with iOS 11.0 or later.
Once the BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases:
Pairing information has been deleted after re-pair, etc.
The system is already paired with 8 devices and another device is to be paired.
The system can be paired with up to 8 devices. If a new device is paired after 8 devices have already been paired, the device
that was paired earliest is replaced by the new one.
The pairing information of the system has been deleted from the BLUETOOTH device.
After you reset the system, it may not be able to connect with your iPhone/iPod. In this case, delete the pairing information of
the system on your iPhone/iPod, then perform the pairing operation again.
The system can be paired with multiple devices, but can only play music from one paired device at a time.
Related Topic
Terminating the BLUETOOTH connection (After use)
The system does not operate properly.
PAIRING on the system for more than 3 seconds until [BT AUDIO] appears on the display.
5-014-121-11(1) Copyright 2020 Sony Corporation
59