Page 2
The Osprey 460e video capture device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 3
95-00462 Osprey 460e Balanced Audio Panel • 95-00463 Osprey 460e Component Video Panel This guide lists the steps for installing an A/V option board to the Osprey 460e video capture cards. This installation requires the following actions: • Connect the A/V option board.
Page 4
Osprey 460e AV Option Installation Guide A/V Option Board The Osprey 460e A/V Option Board (Figure 3) has two connectors, an industry standard DB25 female connector and a DB15 male connector (see pinout tables). Balanced audio is provided on the DB25 connector and it is TASCAM DTRS compatible.
Page 6
Connecting the A/V Option to the Osprey card Note: It is best to use a grounding strap when performing these steps. To connect the A/V option: Locate Audio pin 1 on the Osprey 460e card (Figure 4). Figure 4. Osprey 450e Video Capture Card Video...
Page 7
Install the driver and follow the prompted instructions. Turn off the computer and install the Osprey 460e or 450e and the A/V Option Card. WARNING!: Be sure to install the card in the PCI Express slot. This slot is usually black.
Page 8
Osprey 460e AV Option Installation Guide Figure 8. PCI Express Slot Power up the computer. The OS will detect the newly present Osprey card, and begin to activate the driver. When the installation is complete, reboot the system. Osprey...
Page 9
As an example, the driver lists Osprey 460 Device 1A, 1B, 1C and 1D. The number “1” indicates the first physical Osprey 460e card in a system. A second card is listed as Osprey 460 Device 2A, 2B, and so on.
Page 10
Click on the Video Input drop-down list to display all of the available video inputs for channel A, Composite1, Composite2, Composite3, Composite4, Y/C (S-Video) and Component. Note: The Osprey 460e can capture video from only one of the four composite video inputs at any given time.
Page 11
Figure 13. 95-00460 Osprey 460e/440 Breakout Panel The Osprey 460e/440 breakout panel extends the connector on the Osprey 460e, 450e, or 440 video capture card to the panel. This includes the 4 composite video connectors (BNC) and the 4 pairs of unbalanced stereo audio (RCA) from the breakout cable.