How To Use - Gemini GRB350V Manual

Model
On / Off Button
Indicator
Micro USB port
Power Supply
Input (Micro)
Charging Time
Charging Indicator
Weight
Product Dimensions
Battery capacity
Motor speed
User must install the bottle and transparent cover lid to the plastic bottle before assemble with unit.
The bottle install and twist tightly on the unit base to avoid water leakage during operation.
Before use of the juicer, make sure that the battery is fully charged and clean both bottles and lid with the
ingredients.
The product has dual safety protection switch :
I : Juicer only will work after the bottle is fixed on the seat tightly.
II. Juicer only will work with double-click the On / Off Button to start operation
1.Wash
the
fruit
and
cut
it
into
about
1.5x1.5cm
cubes.
A
fruit
with
a
core,
hard



material,
thic-skinned
or
hard
shell,please
remove
it
first.
2.Add the topped fruit, only about 40% of the bottle . After adding the water,the
total quantity is about 80% ( 300 ml )of the cup capacity
3.Tighten the transparent cover with straw for plastic bottle,and lock the lock
switch upward. When the bottle is screwed into the base,see the blue light
flickering, and then screw it until the hand can not rotate.Make sure that the
bottle and silica rim are sealed.
4.Use
it
for
horizontal
position
as
image,
Double-click
the
On/Off
button
operate. The fruit for apple , pear , citrus, etc. will blend for about 30 seconds.
Shake the product lightly at work, the juice effect is better.
GRB350V
Double-click the On / Off Button to start operation for up to 30 seconds.The indicatorturns
to blue during operation. Continuous juicing will cause excessive heating of electronic
components and affect the service life of the machine.It is recommended to operation every
time for rest about 1 minute.
Standby mode, the indicator shows blue flashing, the indicator turns to blue during operation.
Full charging indicator shows blue color. If the red indicator light is flashing , it means the
protection alert is ON and the machine cannot be operated,it needs to twist the battle tightly
to the base as standby mode.The red and blue indicator lights flash alternately to indicate
the blade is blocked by the fruit/food alert signal,open the bottle and clear the blocked
fruit/food on the cutting blade,then the alert signal can be released . If the red light is always
ON, it means insufficient voltage need to recharge the unit.
USB charging port, insert the end of USB port to the port of base, then connect the USB pin
to the suitable power plug ( DC 5V/2A this part is excluded) for charging
DC5V(The power adapter is not included in package)
2A
About 3 hours under no battery
(power adapter not include this part in package)
I ndicator light will be red
Indicator lights will be blue
812g(including Plastic & Glass bottle and lid)
73 W*260 H*80 D mm (With plastic bottle)
2400mAh Li-battery
14000 rpm

HOW TO USE

use condition
(with DC5V - 2A)
to