Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Artforma S1
Summary of Contents for Artforma S1
- Page 1 User Manual ,,of the S1 Weather Station”...
-
Page 2: Description Of The Device
Description of the device Obsługa włącznika... - Page 3 Description of the device 1. [SNOOZE] button Press this button in order to interrupt the alarm and activate the snooze function. Press it and hold for 2 seconds in order to switch off the alarm clock for 24 hours. 2. [Colour] regulator to set the lighting colour Turn the regulator right or left to choose the colour of the light (from 256 available colo- urs).
- Page 4 Description of the device 7. [MAX./MIN. /-] values In the normal mode, use the button to read the minimum and maximum registered temperature and humidity values. In the setting mode, press the button to reduce values of specifies parameters. Holding the button down will allow you to set the values quicker.
- Page 5 Description of the device 15. [RESET] button Press the button to reset parameters to default parameters. Use the button only when the station does not work properly. 16. Cover of the battery compartment A CR2032-type battery that allows for making a back-up copy of settings and parame- ters of the clock should be put in the compartment.
- Page 6 Description of the external sensor 1. LED Indicator The indicator flashes when the peripheral unit sends the data. 2. LCD screen The screen shows temperature and air humidity that were measured by the sensor. 3. A holder to be fixed on the wall 4.
-
Page 7: Technical Data
Technical data Central unit Temperature range during operation -5 °C -50 °C Temperature resolution 0.1 °C Environment humidity range 20% ~ 90% Displayed humidity range 1 % ~ 99% Humidity resolution Time signal format DCF or MSF Wireless sensor Temperature range during operation -20 °C -60 °C Temperature resolution 0.1 °C... - Page 8 Preparation of the external sensor to operation 1. First, remove the cover of the battery compartment. 2. Then put two AA batteries in the compartment. Remember to keep the polarity of batteries while putting them into the compartment according to the markings inside.
- Page 9 Preparation for the use of the station 1. First, connect the power adaptor to a permanent power supply. 2. Then press [RESET] button to restart the clock and to start an automatic synchronisation with time signal transmitter.
- Page 10 Reception of the radio time signal The date and time are controlled with a time signal. The current time is synchronises automa- tically with the time transmitter signal. Press the [RCC] button to start automatic synchronisation.
-
Page 11: Signal Quality Indicator
Signal quality indicator The indicator indicates the signal intensity at 4 levels. Flashing of those indicator means the time signal is being received. The signal quality is assessed at 4 levels: No signal within the range Weak signal Sufficient signal... -
Page 12: Time Settings
Time settings If you are beyond the reach of the time signal transmitter or if the format of the signal is wrong, you can set time manually. Once the station receives the time signal from the trans- mitter once again, the clock will synchronise automatically with the received data. - Page 13 Alarm Clock settings 1. Turning on or off the alarm clock In the normal time display mode, press the [ALARM] button to check alarm clock settings. Press the button once again to turn on/off the alarm clock function. A bell icon will appear or disappear on the screen then.
- Page 14 Weather forecast The weather station is equipped with an air pressure sensor serving for generating a weather forecast for the next 12-14 hours. Sunny Moderate clouds Full clouds Rain Snowfalls WARNING! In case of inconsistencies between the weather forecast from the local meteorological station and the forecast from this device, the priority should be given to the local meteorological station.
- Page 15 Displaying and removal of max/min temperature and humidity records In the normal operation mode, press the [max./min./-] button to display the maximum temperature and humidity record. Press the button twice to display the minimum values record. When you press the button once again, the display of the record will stop.
- Page 16 Colourful light of the display screen depending on the temperature Use the [OUTDOOR TEMP] button to activate the “colour according to the temperature” mode and to set the colour depending on the temperature measured by a wireless sensor. You can choose from 17 light colours and assign them to the selected temperature range.
- Page 17 The battery discharge indicator If the battery discharge indicator appears near the outdoor temperature data, it means that the batteries of the external sensor are discharged and they should be replaced immediately with 2 new AA-type batteries.
- Page 18 Remarks The main unit is intended only for indoor use. Do not expose the unit to any excessive force nor impacts. Do not expose the unit to extreme temperatures, sunlight, fluids or humidity. Remember not to immerse the unit into the water.
- Page 19 FORAM Sp. z o.o. sp. k. Karpicko, ul. Podgórna 16, 64-200 Wolsztyn NIP 923-172-93-78, REGON 381749814 Mail EU: info@artforma.eu; Mail PL: biuro@artforma.eu +48 68 422 73 65 We work from Monday to Friday from: 9: 00 AM to 3. 00 PM...
Need help?
Do you have a question about the S1 and is the answer not in the manual?
Questions and answers