Advertisement
Quick Links
•
INDEX
- SIGNALS ON THE MACHINE
- GRAPHIC SYMBOLS USED IN THE MANUAL
- GENERAL WARNINGS
- WARRANTY
- RICEIPT
- LIFTING AND MOVING
- MACHINE APPLICATIONS
- CORRECT AND INCORRECT USE
- CLEANING
- POSSIBLE RISKS
- CONFORMITY TO REGULATIONS
- NOISE LEVEL
- TECHNICAL FEATURES
- SAFETY SYSTEM ADOPTED
- ELECTRIC CONNECTION
- FIRST STARTING AND TESTING
- ROLLERS REGULATION
- BELT AND CHAIN TENSION
- BELT TENSION
- UNLOCKING THE SAFETY GUARD
- SAFETY GUARD POSITION
- ELECTRIC BREAKDOWNS IN THE MOTOR AND IN THE SAFETY SYSTEM
- IF THE MACHINE DOES NOT START
- DISMANTLING AND DEMOLISHING THE MACHINE
- WIRING DIAGRAM
Pag. 2
Pag. 2
Pag. 2
Pag. 3
Pag. 3
Pag. 3
Pag. 4
Pag. 4
Pag. 4
Pag. 4
Pag. 5
Pag. 5
Pag. 5
Pag. 5-6
Pag. 6
Pag. 6
Pag. 6
Pag. 7
Pag. 7
Pag. 7
Pag. 7-8
Pag. 8
Pag. 9
Pag. 9
Advertisement
Summary of Contents for Flamic SF450B
- Page 1 • INDEX Pag. 2 - SIGNALS ON THE MACHINE Pag. 2 - GRAPHIC SYMBOLS USED IN THE MANUAL Pag. 2 - GENERAL WARNINGS Pag. 3 - WARRANTY Pag. 3 - RICEIPT Pag. 3 - LIFTING AND MOVING Pag. 4 - MACHINE APPLICATIONS Pag.
- Page 2 Before operating the machine, please read carefully and thoroughly the following safety instructions and directions for use. Only in this way will you learn how to use the machine properly and avoid misuse and dangerous situations. Keep this manual in a proper place, near the machine, and have all the staff know where it is kept.
- Page 3 Keep the signals of danger and the safety instructions clean and tidy. When using the machine, wear tight-fitting clothes without any loose parts. Do not wear open or unfastened jackets, shirts or overalls. Descriptions, pictures, weights and sizes shown in this manual are meant as not binding. The firm reserves the right to make changes, being understood that the main characteristics of the types above described and illustrated are not changed.
- Page 4 • MACHINE APPLICATIONS The dough sheeter processes cereal flour doughs and pastries for pizzerias, bakeries and confectioneries and rolls egg/butter/cream/ products etc. Any other use will be considered contrary to the applications as originally intended by the manufacturer, who will consequently not be held liable for any damage to the machine itself or to other objects, or for any injuries to persons that may arise thereof.
- Page 5 The machine was realized in conformity with the Directive Machine 89/392/CEE (and with following modifications 91/368/CEE 93/44/CEE 93/68/CEE). • NOISE LEVEL The average noise level measured near the working place is less than 70 decibel. • TECHNICAL FEATURES MODELS SF450B TYPE BENCH BELTS WIDTH 450 mm BELTS LENGHT...
- Page 6 Even a very slight lifting of the cover is enough to stop the machine; the immediate stop is caused by the two position sensors placed inside the machine (fig. 3). Fig. 3 An emergency push-button with a red head on the frontal panel is within easy reach from the working place (fig.
- Page 7 ROLLERS REGULATION The roller gap is obtained by moving the handle on the right or on the left (Fig. 6). Each step of the handle on the toothed sector operates a different thickness. THE ROLLERS CANNOT WORK IF THEY ARE IN CONTACT WITH EACH OTHER.
- Page 8 • SAFETY GUARD POSITION Safety guard open for replacing the scraper. In this case the machine can not working. Safety guard close for working with the sheeter (Fig. 11) Safety guard close for closing the tables of sheeter as in the Fig. 13...
- Page 9 Tables of sheeter closed Pin for locking the tables when the tables are closed (Fig. 14) • ELECTRIC BREAKDOWNS IN THE MOTOR AND IN THE SAFETY DEVICE You must contact the electrician or the manufacturing firm. • IF THE MACHINE DOES NOT START 1.
- Page 10 CHECK IF THE POSITION SENSORS (FIG.3) ARE WORKING CORRECT. • DISMANTLING AND DEMOLISHING THE MACHINE The components of the machine do not require any particular care, when dismantling or demolishing the machine. Remember, however, to remove electrical components from the machine to help recycling.