Advertisement
Table of Contents
Phone (717) 445-0510
Toll-Free (877) 800-2500
Fax (717) 445-0511
Raytec LLC 544 Gristmill Road, Ephrata, PA 17522
Instructions for Assembling the Caf-Cart
Tools Required
2- 7/16" wrenches
2- ½" wrenches
1- Flathead screwdriver
1- Pliers
Parts:
1- plywood floor
2 Wheels
1- Green
1- Green Front
Back Frame
Frame
2- Lower Side Panel
2- Upper Side Panel
1- Tube Axle Frame Assembly
2- Connecting Sleeves
1- Tube Handle Frame
2- Axles
1- Lower Door Hinge
1- Bolt Pack
1- Door
2-Handle Latches
Advertisement
Table of Contents
Summary of Contents for Raytec Caf-Cart
- Page 1 Phone (717) 445-0510 Toll-Free (877) 800-2500 Fax (717) 445-0511 Raytec LLC 544 Gristmill Road, Ephrata, PA 17522 Instructions for Assembling the Caf-Cart Tools Required 2- 7/16” wrenches 2- ½” wrenches 1- Flathead screwdriver 1- Pliers Parts: 1- plywood floor 2 Wheels...
- Page 2 Phone (717) 445-0510 Toll-Free (877) 800-2500 Fax (717) 445-0511 Raytec LLC 544 Gristmill Road, Ephrata, PA 17522 Steps 1. Attach the floor panel to the lips of both lower side panels with four ¼ x 1” carriage bolts (bolt head goes inside of the cart) lock washers and nuts.
- Page 3 6. Mount the tube frame assembly to the box. Use the four 5/16 “ x ½” machine bolts and lock washers to mount the bushing plates to the lower portion of the front yoke end. Be sure bushing plates are turned upward when mounting. Bolts will be above the tube in front of Caf-Cart when mounted.
Need help?
Do you have a question about the Caf-Cart and is the answer not in the manual?
Questions and answers