Content page Content Introduction Application area The complete system Working with the system Safety Setting up & connecting the system Electricity Temperature and moisture Using the system Before starting an inspection Connecting the system Controlpanel Easybox Remote control ZRK Text generator Meter counter USB interface Laptop prepared Easybox (optional)
Introduction This manual is for: Easybox (98320953) Easybox DVR (98325930) Easybox prepared for laptop (98324524) 2.1. Application area Depending of your choice of camera head and the kind of cable every camera has it’s own working area. 36 mm camera: Suitable to inspect pipes of ...
2.3 Working with the system All parts of the system are made of high quality material and assembled with great precision. For optimal usage of the system regular maintenance is necessary. You will find instructions and tips in this manual about: ...
3. Safety Setting up & connecting the system Mind the following aspects before setting up or starting up the system: Place the Easybox on a dry and solid ground. Place the reel in such way that it cannot fall into the well. Be aware the system is switched off and not connected to the power grid before you connect any connector.
4. Using the system Before starting an inspection Before starting an inspection be sure that the pipe has been totally cleaned. Caution! Never use the camera for unblocking a pipe! If you feel resistance and can’t push the camera any further, do not continue the inspection. Gently pull back the camera and clean/ unblock the pipe first and then continue the inspection.
Controlpanel Easybox The controlpanel of the Easybox has the following funtions: Fuse 6,3A Power supply for remote ZRK 70 Video in and video out connectors Transmitter (optional) Inspector 36/ 45 / 48 Light Reset button to set adjustment, meter counter back to ‘0’...
4.4 Remote control ZRK In case you are using a ZRK70 camera head, it has to be operated with the remote control. Basic functions Swerving and rotation; blue buttons Focus; orange buttons Lighting; yellow buttons Truck; turning knob, see also paragraph 4.14 Smart functions ...
4.7 Usage of the USB interface It is possible to record video and pictures on a computer by using the USB port. This function can be found on the Easybox with USB interface, the laptop prepared Easybox and the Easybox with digital video recorder. Before you can start recording pictures and video, you have to take a number of steps.
4.10 Tool (accessories) The tool to ‘steer’ the ZRK70 camerahead has to be mounted as follows. First, remove the black plastic guide plate on the side where the “endstop” sticker is positioned. Replace this plate with the newly supplied aluminium plate. Secondly, unscrew the two central screws which are positioned left and right from the camera glass.
Operating the Steering Unit 1. push SHIFT + navigation arrows to bend or rotate the steering unit 2. push SHIFT + top left button (‘light’) to put the steering unit back into its default position Mounting the extra piece 1. same steps as with mounting the steering unit Maintance of O-rings (sealing ring) In case you sense friction during screwing the different parts, you can apply...
4.14 Truck, how to use Follow the steps below and strictly follow the sequence. Preparing the system 1 Place each item of the system on a relative levelled surface and connect the cable of the motorized reel to the truck. 2 Mount the pull protection.
Page 13
Operating the system When operating the system two aspect have to be taken into account. 1. The system has a delay function. This means that after you´ve turned the knob it will take a few moments before the truck actually starts driving. 2.
5. Maintenance It’s of great importance to regularly clean and grease the system. If you do this at a regular base it will increase the lifetime of the system. After each inspection the system should be cleaned thoroughly, especially the camera head and the connectors.
All the specifications, construction specifications, way of act and illustrations in this manual are not strictly. We have the right to make an alternation to the manual without any announcement. ------------------------------------------------------------------------------------------------------------- The Inspector is a product of Camtronics BV Ekkersrijt 3209 5692 CG SON Phone:...
Appendix I: USB Please see for more detailed information the supplied manual on CD. Video Digitiser installation instructions Video digitiser software manual Install the drivers Insert installation CD and run Autorun.exe Click Driver Installation Connect the video digitiser Follow the steps.
Page 17
You will see a program icon on the windows desktop, which you can use to start the software Set the video standard Start the ArcSoft Showbiz software Click the Capture tab. Set the video source at Video Grabber Click Device Settings and set the Video Standard option to PAL_B and confirm with okay.
Appendix II: User manual digital video recorder (DVR) In general The digital video recorder in the Easybox is being used to record and store videos on a SD- Card. Remark: It may take a few seconds for the DVR to execute a command after you have pressed a button, so please be patient.
Page 19
Start up Insert an SD Card into the SD card connector under the cover. Press the ON button, the red light is getting green and flashing. After a few seconds, the light turns green continuously. The DVR is ready for use Recording 1.