Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for GME W1
Summary of Contents for GME W1
- Page 1 Wireless PTT Remote INSTRUCTION MANUAL...
-
Page 2: Table Of Contents
An external remote microphone is also included for mounting in your vehicle allowing effective hands-free communications while driving. Once the W1 is connected to your radio, several new options will be enabled in your radio’s menu (see ‘RADIO MENU OPTIONS’). -
Page 3: Replacing The Battery
INSTALLATION Range The W1 has a line-of-sight range of around 5 – 7 meters depending on the installation. Range may be reduced slightly if the radio or the W1 is mounted close to metal surfaces. This should not have any noticeable effect on most installations, however, if mounting the remote unit in a bus, motor home or other similar sized vehicle please be aware of the range performance when planning your installation. - Page 4 Temporarily place the W1 into the top clamp then place the top clamp on the steering wheel at the preferred location. Rotate the W1 to the desired angle, then turn the clamp over and secure the W1 using the two screws provided. The clamp has...
- Page 5 Insert spacer as required Panel Mount The W1 can also be mounted onto a flat surface using the supplied adhesive foam. Mount the W1 in a location that is easy to reach without distraction while driving. NOTE - installing onto a metallic surface will reduce the signal range.
-
Page 6: Installing The Remote Microphone
If a longer cable run is required, an LEM6P 4 metre microphone extension lead is available through your local GME retailer. NOTE: Installing the external remote microphone is optional. The radio can be configured to use the original hand microphone for hands-free communications if preferred. -
Page 7: Pairing
External remote microphone mounting suggestions PAIRING Before using your W1 you will need to ‘Pair’ it with your radio. This one-time process uses a secure internal code to link your W1 exclusively with your radio. Once pairing has been completed, your radio will automatically identify your W1 each time your radio is switched on and will reconnect without further action from you. - Page 8 be used for hands-free transmissions. You can for example plug the original hand microphone into the front socket and the remote microphone into the rear socket and configure the rear socket for hands-free use. Alternately you could choose to install just the original hand microphone and use it for both handheld and hands-free operation.
-
Page 9: Programmable Key Functions
3. Press the remote button and talk again in a normal voice. If the other person indicates that your voice level is now too high or too low, you can adjust the gain as follows. a. Press and Hold the key until the radio beeps. -
Page 10: Using The Channel Selector Option
3. Rotate the selector or press Channel Scan/Priority Opti on (WSCAN) keys to toggle between ‘WCHNL’ (Channel Selector) or ‘WSCAN’ (Scan/Priority) functions. 4. Press and hold (or wait for the Menu Menu function to time-out) to store your setting and exit the Menu. USING THE CHANNEL SELECTOR OPTION Briefly press the... -
Page 11: Against Defects
WARRANTY AGAINST DEFECTS This warranty against defects is given by Standard Communications Pty Ltd ACN 000 346 814 (We, us, our or GME). Our contact details are set out in clause 2.7. 1. Consumer guarantees 1.1 Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. - Page 12 (f) goods where the serial number has been removed or made illegal. 4. Warranty period 4.1 We provide the following warranty on GME and Kingray products. No repair or replacement during the warranty period will renew or extend the warranty period past the period from original date of purchase.
Need help?
Do you have a question about the W1 and is the answer not in the manual?
Questions and answers