Classic Accessories Zero Turn 73997 Instructions

Instructions: Zero Turn Mower Cover
Fitting
Your Zero Turn Mower Cover
will fit zero turn tractors with
mowing decks up to 50". It may
not cover some accessories such
as grass catchers or mulchers.
Installation
Check your mower for sharp
corners or edges that could
stress your cover as you pull
it on.
Look for a white tag sewn
in the bottom hem that says,
"front". Slip your cover over the
top of your tractor with
the white tag at the front,
then pull the cover down
on all four corners.
Cleaning and Care
Clean your cover with a soft
brush and luke-warm water. DO
NOT USE SOAP as it may remove
the protective coatings added by
the factory. Air dry.
Storage
To avoid any
possibility
of mildew
be sure
your
cover is
completely
dry before
you store it in
an enclosed area
for a long period.
One Year Warranty
This cover is factory warranted
for workmanship and materials
for one year after purchase.
73997 07cH51_6530