3.
Select a convenient location near the Ethernet device to which
the modem will be connected. The modem should be kept away
from excessive heat or cold. Operating temperature range is
-5˚C to 55˚C.
4.
Connect an RJ-45 straight-through cable from the 10Base-T
Ethernet connector of the XL-12000B to an Ethernet device (PC,
server, workstation or hub) as shown in Figure 4.3. If connecting
to a PC, server, or workstation, set the Ethernet connection
switch on the back of the modem to the "Crossed" position.
If connecting to a 10Base-T hub, set the switch to "Normal".
5.
Connect the RJ-11 DSL Line cable from the DSL connector on
the modem to the telephone jack.
6.
Verify that you have a telephone line linking the two XL-12000B
modems. Verify that this line has no bridge taps and is generally
free of noise.
7.
Connect the wall transformer as shown in Figure 4.3.
4.0 INSTALLATION
Figure 4.2 RJ-11 DSL Line Cable
5
2
HIGH-SPEED NETWORK MODEM
3
4
XL-12000B
3
4
2
5
TUT SYSTEMS
5