Page 3
Enjoy the quality and performance of your new FURY 2 ! You must be at least 18 years old to purchase and use the FURY 2. This product should not be used by children, women who are pregnant or breast feeding, or those with life threatening illnesses - without first consulting a doctor.
Page 4
FURY 2 Overview: Power Button OLED Display Temp Control + Temp Control -...
Page 5
FURY 2 Start-Up: 1. Charge the unit for 2 hours before first use. The battery will stop charging when the battery icon is full. 3. Turn the unit on the maximum temperature for a complete 4 minute cycle to burn-off any manufacturing residue.
Important Features: 1. Rapidly click the Power Button 3 times within 2 seconds to power on or off. 2. Press and hold the Power Button for 3 seconds to enter Stealth Mode. 3. Press and hold Power Button and [-] button simultaneously for 2 seconds to change the display from Fahrenheit to Celsius or from Celsius to Fahrenheit.
Included in the Box: Quartz Tank Silicone O-Ring Wall Charger Dab Tool Brush Tweezers FURY 2 Cover and Screen & Micro USB...
Page 8
User Tips: 1. For best results, fill the chamber halfway or more and do not pack your material. Not packing allows the hot air (convection) to flow easily through your herbs for even heat distribution and extraction. 2. Turn off the unit when you are done by clicking the Power Button 3 times rapidly within 2 seconds.
75 - 90 Minutes Stealth Mode Push Power Button For 3 Seconds WARNING: Always store your FURY 2 in a dry place to protect it from the effects of weather. KEEP OUT OF THE REACH OF CHILDREN AND/OR UNQUALIFIED PERSONS.
Using the FURY 2: 1. Load your dry herbs into the chamber and replace the lid. 2. Click the Power Button 3 times rapidly to turn on/off. 3. The OLED screen will display the Unit’s current temperature. The indicator light will be when heating and once your desired temperature is reached - it will turn GREEN.
Page 11
How to Load Dry Herbs: 1. Push out the mouthpiece 2. Load herbs loosely 3. Replace the mouthpiece & you are ready to vape...
Page 12
How to Load Oil & Wax: 2. Pull out the silicone 3. Load wax/oil cap from quartz cup 1. Remove the mouthpiece 4. Replace the 5. Put quartz cup 6. Replace the mouthpiece silicone cap into the FURY 2 & you are ready to vape...
Page 13
How to Clean or Replace the Screen and O-Ring: 2. Remove the O-ring & screen 3. Replace the new or cleaned O-ring and screen 1. Remove the mouthpiece 4. Put the O-ring and screen back onto the mouthpiece...
How to Clean: 1. Remove the mouthpiece 2. Remove the material 3. Use the cleaning brush to remove the remaining from the chamber material from the chamber...
Page 15
Deep Cleaning - Recommended Every Week: 1. Remove the mouthpiece. 2. Empty the chamber. 3. Remove the silicone O-ring & screen from the mouthpiece. 4. Remove the O-ring from the screen and brush them using ISO alcohol - then rinse with water.
Need help?
Do you have a question about the FURY 2 and is the answer not in the manual?
Questions and answers