Seat Belts - Mercedes-Benz 300 SD-TURBO DIESEL 1983 Owner's Manual

Seats
)

Seat Belts

Warning system:
The indicator is illuminated for
4 - 8 seconds after turning the steer­
ing lock key to position " 2" . If the
seat belt of the driver's seat is not
fastened a warning buzzer sounds
simultaneously.
Fastening:
• Pull belt with latch plate (1) over
shoulder and lap. The belt must
not be twisted.
20
Press latch plate (1) into buckle (2)
•
and allow to engage audibly.
Adjust front seat belts so as to
have the upper belt located as
near as possible to the middle of
the shoulder. For this purpose,
push button (4) and raise or lower
belt outlet (3 positions).
• The belt must be tight and must be
checked for tightness immediately
after fastening and regularly during
the trip. If required, tighten lap belt
by pulling up on the upper belt
section.
Unfastening:
• Depress red button (3) in buckle.
• Return latch plate (1) to initial
position.