Download
Share
Print this page
SPACEMAKER A24027 Manual For The Use & Care
  1. Manuals
  2. Brands
  3. SPACEMAKER Manuals
  4. Grill
  5. A24027
  6. Manual for the use & care

SPACEMAKER A24027 Manual For The Use & Care

Outdoor
Hide thumbs

Advertisement

Quick Links

Download this manual
SP908-37 A24027-150.qxd
03/10/2003
MODELS A24027
The Model Shown Has Options.
Model Purchased May Not Be As Shown
Full Model # (from outer carton):
Date Purchased:
Serial Number
(from rating plate):
SAVE THIS MANUAL FOR YOUR FUTURE REFERENCE
Installer must leave these instructions
with the consumer for future reference.
THIS APPLIANCE IS FOR OUTDOOR USE ONLY
4:45 PM
Page 1
Manual For The Use & Care of Your
OUTDOOR GAS BARBEQUE / GRILL
WARRANTY INFORMATION
TM
WARNING!
!
Hazardous Fire or Explosion may result if
these instructions are ignored.
It is your responsibility to see that your new barbeque is
assembled, installed, maintained and cared for properly.
Failing to carefully follow the instructions in this manual
could result in serious bodily injury and/or property damage.
FOR YOUR SAFETY
IF YOU SMELL GAS:
1. Shut off gas supply to the appliance.
2. Extinguish any open flame.
3. Open lid.
4. If odour continues, immediately call your gas supplier
or your fire department.
FOR YOUR SAFETY
• Do not store or use gasoline or other flammable vapours
and liquids in the vicinity of this or any other appliance.
• An LP cylinder not connected for use shall not be stored
in the vicinity of this or any other appliance.
KEEP YOUR RECEIPT AS PROOF OF
PURCHASE TO VALIDATE THE
WARRANTY. ATTACH YOUR RECEIPT
TO THE INSIDE COVER OF THIS
MANUAL FOR EASY REFERENCE.
info
1-800-387-8643
FIESTA BARBEQUES™ LIMITED
2 Walker Drive, Brampton, Ontario L6T 5E1
1-800-387-8643
TEL.
1-888-801-7772
FAX
www.fiestabbq.com
SP908-37

Advertisement

loading
Need help?

Need help?

Do you have a question about the A24027 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SPACEMAKER A24027

  • Page 1 SP908-37 A24027-150.qxd 03/10/2003 4:45 PM Page 1 Manual For The Use & Care of Your OUTDOOR GAS BARBEQUE / GRILL WARNING! MODELS A24027 Hazardous Fire or Explosion may result if these instructions are ignored. It is your responsibility to see that your new barbeque is assembled, installed, maintained and cared for properly.

  • Page 2: Tools Required

    SP908-37 A24027-150.qxd 03/10/2003 4:45 PM Page 12 ASSEMBLY INSTRUCTIONS: TOOLS REQUIRED: 11 and 13mm spanner, small adjustable spanner, crosshead & slothead screwdrivers. • Extra Common Nuts & Bolts are supplied. • Refer to diagrams to assemble your grill. FIGURE 1.
  • Page 3 SP908-37 A24027-150.qxd 03/10/2003 4:45 PM Page 13 FIGURE 2. Insert leg plug in front left leg. Position remaining left front leg through console slot and insert leg cap. Position console over right front leg through console slot. Casting support must locate BETWEEN leg and console.
  • Page 4 SP908-37 A24027-150.qxd 03/10/2003 4:45 PM Page 14 STEP 5 FIGURE 3. LEFT Loosely assemble left leg to console with casting FRONT bracket BETWEEN as shown with 1 1/2" bolt VIEW and nut. Assemble right leg to console same as Step 5.

  • Page 5: Valve Assembly

    SP908-37 A24027-150.qxd 03/10/2003 4:45 PM Page 15 FIGURE 4. Attach valve assembly to console as shown using 3/8" screws. Insert push button ignitor and snap into place. SCREW (X2) Push on valve knobs. #6-32 X 3/8" CONSOLE VALVE ASSEMBLY SCREW...
  • Page 6 SP908-37 A24027-150.qxd 03/10/2003 4:45 PM Page 16 FIGURE 5. GREASE CLIP • Position base on brackets WING NUT as shown. • Position wing brackets as shown and secure with wing nuts. • Insert grease clip through WING NUT hole as shown.

  • Page 7: End View

    SP908-37 A24027-150.qxd 03/10/2003 4:45 PM Page 17 BURNER IGNITOR CLIP ELECTRODE BURNER BOTTOM VIEW BURNER IGNITOR CLIP ELECTRODE END VIEW FIG. 6 FIGURE 6. Carefully insert and snap ignitor electrode into ignitor clip as shown. Push into left hole with a twisting motion.
  • Page 8 SP908-37 A24027-150.qxd 03/10/2003 4:45 PM Page 18 BURNER BASE CASTING BURNER BASE CASTING 3/8" VENTURI FIG. 7 IGNITOR WIRE BURNER FEET FIGURE 7. Carefully install burner through holes in bottom of casting. Ensure end of ignitor electrode and wire fit down through hole in casting, and electrode does not get damaged.

  • Page 9: Cooking Grill

    SP908-37 A24027-150.qxd 03/10/2003 4:45 PM Page 19 FIGURE 8. Install lava grill, lava rock, and cooking grill. COOKING GRILL LAVA ROCK LAVA GRILL FIG. 8...
  • Page 10 SP908-37 A24027-150.qxd 03/10/2003 4:45 PM Page 20 FIGURE 9. • Position cover and secure from rear with spring clip in groove on right hinge pin. • Install front handle as shown using #10 x 3" bolts, plastic spacer, heat gasket and wing nuts.
  • Page 11 1" CROSSHEAD SCREWS SHELF WOOD 1" CROSSHEAD SCREWS (X8) (BAG SP137-24) FIGURE 10. FIG. 10 Attach shelf wood as shown using 1" Crosshead Screws. Long overhang goes toward front.
  • Page 12 SP908-37 A24027-150.qxd 03/10/2003 4:45 PM Page 22 FIGURE 11. Loosely attach tank bracket using carriage bolt and wing nut. Position tank on pan tank locator. Raise tank WING bracket and position over tank ring, tighten wing nut. CARRIAGE BOLT 1/4" X 1/2" CARRIAGE BOLT...
  • Page 13 SP2-18 1/4-20 X 1/2" CARRIAGE BOLT (BAG PACK SP137-24) SP2-16 1/4-20 WING NUT (BAG PACK SP137-24) Fiesta Gas Barbeque Grill: Model A24027 How to Order Spare Parts: When ordering, always give the following information: 1. The Part Number 2. The Model Description 3.