Wickes Ohio 300 Assembly Manual

300, 400, 500 and 600 Wall Unit Assembly
Important Information
Caution: Some pieces of hardware could be hazardous to small children. Keep all these items out of reach and do not leave children unattended in the assembly area.
Please read these instructions carefully before proceeding. Some of the units are quite large and may have to be assembled in the room where they are to be installed.
Note: Due to variation in wall conditions no screws are supplied for fixing the units to the wall. If in doubt consult an expert. Assemble the unit on a clean solid work surface. Screws for joining cabinets together are
not supplied.
In the interest of continuing improvements we reserve the right to amend or adjust the specifications without prior notice. Errors and omissions excepted.
These units have been designed to give you years of pleasure and satisfaction. You can help to maintain the original beauty of your kitchen by following these guidelines.
Cleaning: Any spillage, even water, should be removed from the surface immediately. Remove any marks with a soft damp cloth and mild household detergent. Wipe over with a damp cloth to remove any excess
moisture and dry with a soft, clean cloth. Do not use solvents, abrasive cleaners or pigmented glass cleaners.
Helpful Information
Every effort has been made to ensure that this product leaves the factory in perfect condition. In the unlikely event that an item is damaged or incorrect, please follow these instructions:
Replacement fascias/doors: Please call 01132 013495 between 8am and 5pm, Monday to Friday. Please have your batch number and product code ready to quote from the side of the box in order to request a
replacement. On receipt of all the required information this will be despatched directly to your home within five working days.
Replacement, damaged or incorrect fittings or cabinet parts: Please contact the store where the item was purchased for replacements.
Ref. No. Item Quantity
150101 8
3.5x13mm
150126 4
6x32mm
154084 8
154085 8
Assembly Instructions
1 2
1 2 2 1
A
1 2 2 1
1
1
154084 8
Ref. No. Item Quantity
154004 8
151999 2
154024 4
152104 2
152112 2
1 2 2 1
A
1 2 2 1
2
2
154004 8
Components
Ref. No. Item Quantity
152201
152212
2
151701
(If required)
3
B
3
3
B
3
3
3
3
154085 8
B
D A
C
A
B
Note: There may be some
difference in top/bottom panel
drilling depending on unit size.
Tools Required
2
5mm
Drill
Medium Crosshead
2
Screwdriver
Large Flathead
Screwdriver
Spirit Level
4 5
3
3
B
3
3
4
4
4
Do Not Over Tighten
Start
G-Clamp
(pair)
Hammer
Tape Measure
Bradawl
B
A
4
4
5
Locked