Eneo VDA-4A Installation & Operating Manual page 7

3. Connection of the VDA-4A
The use of a video distributor is necessary at units without looping-input, plug panels
or complex distributor nets. The branching of black and white as well as colour signals
is loss-free. The 75ohms termination of arriving signal is effected internal at input
socket.
• The BNC-Socket „IN" has to be connected with the incoming signal (75ohms coax
cable) from a camera or any other video signal source.
• The BNC-Socket „OUT" has to be connected with the outgoing signals (75ohms
coax cable) to monitors, video recorders, printers and so on. The last connected unit
(per output channel) has to be terminated with 75ohms.