Accessories that may be suitable for one product may become hazardous when used on another product. SC071008JJ PAGE 2 Please DO NOT return unit to store or dealer. For all questions or shortages please contact...
Page 3
Maintain labels and nameplates on the Shelter. These carry important information. If unreadable or missing, contact MDM Products for a replacement. use the right product for the job. There are certain applications for which this product was designed. Do not use small products to do the work of larger industrial products.
Page 4
UNPACKING When unpacking, check to make sure that all parts listed below are included. If any parts are missing or broken, please call MDM Products at the number on the cover of this manual as soon as possible. BOX A - 87549...
Frame Assembly Assembling and positioning the End base and center base Rails: Lay out the four End Base Rails (5) and two Center Base Rails (6) in the assembly area. (See figure A). Slide the End Base Rails (5) and Cen- ter Base Rails (6) together rmly, but do not secure with screws yet.
Page 6
Place the bottom of the Side Posts (4) on the Base Rail (5, 6) pins and drop the Side Posts onto the pins. (See figure d.) figure D figure E Side Anchor post (4) Stake (7) center base Screws Rail (6) End base End base Rail (5)
Page 7
Screw Roof Roof figure F Screw figure G panel (1) panel (1) foam Tape (10) With the Panel (1) lined up with the marks, attach the panel to the rst frame section, using the Screws (8) in three places in the center of the end side, as shown in figure f.
INSPECTION, MAINTENANCE, AND CLEANING CAUTION! • If any problems are discovered during inspection, discontinue use and promptly have the problems remedied. do not use damaged equipment. • Wear ANSI-approved safety impact goggles and heavy work gloves before performing any inspection, maintenance, or cleaning of the Shelter. •...
PARTS LIST part description Q’ty Panel Peak Tube Rafter Side Post End Base Rail Center Base Rail Anchor Stake Screw Edge Trim 1 roll Foam Tape 1 roll PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY.
ASSEMBLY DIAGRAM note: Parts 8-10, not shown. Record product’s Serial number Here: note: If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts.
Need help?
Do you have a question about the SC071008JJ and is the answer not in the manual?
Questions and answers