Table of Contents
Advertisement
PTZ980
DIGIMIC
PTZ980
DIGIMIC
3G-SDI Full-HD PTZ Camera
Article no.: 07.0920
BRÄHLER Systems GmbH
Auf der Alten Burg 6
53639 Königswinter
Germany
07.0920 191011 V1.0 BRÄHLER Systems is committed to continually improving its products and so reserves the right to make technical modifications without notice.
Operating Manual
T +49 (0)2244 930-0
F +49 (0)2244 930-450
sales@braehler-systems.com
www.braehler-systems.com
1
Advertisement
Table of Contents
Summary of Contents for Brahler DIGIMIC PTZ980
- Page 1 PTZ980 Operating Manual DIGIMIC PTZ980 DIGIMIC 3G-SDI Full-HD PTZ Camera Article no.: 07.0920 BRÄHLER Systems GmbH T +49 (0)2244 930-0 sales@braehler-systems.com www.braehler-systems.com Auf der Alten Burg 6 F +49 (0)2244 930-450 53639 Königswinter Germany 07.0920 191011 V1.0 BRÄHLER Systems is committed to continually improving its products and so reserves the right to make technical modifications without notice.
- Page 2 PTZ980 Operating Manual DIGIMIC Printed in the Federal Republic of Germany If you have any questions about this operating manual, please contact us: BRÄHLER Systems GmbH Auf der Alten Burg 6 53639 Königswinter (0)2244 930-0 (0)2244 930-450 sales@braehler-systems.com www.braehler-systems.com Note: Changes or modifications to this equipment not expressly approved by Brähler Systems could void the FCC's authority to operate this equipment.
-
Page 3: Table Of Contents
PTZ980 Operating Manual DIGIMIC Index Index Index Index About this manual ..............................5 Symbols ................................5 General information .............................. 5 Important notes ................................ 6 Safety instructions ..............................6 Safety information ..............................7 DIGIMIC Camera System ............................8 System components ............................. 8 Construction ................................ - Page 4 PTZ980 Operating Manual DIGIMIC System Setting ............................... 26 Camera Setting .............................. 27 EXPOSURE SETTING ..........................28 COLOR SETTING ............................29 IMAGE ................................30 FOCUS ................................30 NOISE REDUCTION ............................ 31 P/T/Z ................................31 Video Format ..............................32 Version ................................32 Restore Default ..............................
-
Page 5: About This Manual
PTZ980 Operating Manual DIGIMIC About this manual About this manual About this manual About this manual Keep these operating instructions together with the device. If you pass the device on to a third party, also pass on this manual. Symbols Symbols Symbols Symbols... -
Page 6: Important Notes
PTZ980 Operating Manual DIGIMIC Important notes Important notes Important notes Important notes S S S S afety instructions afety instructions afety instructions afety instructions Read this manual! Keep the manual in a safe place Note the warnings given Follow the instructions Do not use the device near water. -
Page 7: Safety Information
PTZ980 Operating Manual DIGIMIC Safety information Safety information Safety information Safety information Warning! Warning! Warning! Warning! To reduce the risk of fire or electric shock, do not expose the appliance to rain or moisture. Do not open the appliance! There are potentially dangerous voltages inside. Refer all servicing to qualified service personnel. -
Page 8: Digimic Camera System
PTZ980 Operating Manual DIGIMIC cables. Dispose of all individual components in accordance with local waste disposal regulations. DIGIMIC DIGIMIC C C C C amera amera S S S S ystem ystem DIGIMIC DIGIMIC amera amera ystem ystem Thank you for choosing the camera system for your DIGIMIC microphone system. You have invested in future- proof camera and conference technology. -
Page 9: Construction
PTZ980 Operating Manual DIGIMIC Construction Construction Construction Construction Example system image The camera can be rotated, panned and zoomed. With a combination of several cameras, almost any angle of a conference room can be optimally staged. Network connector (RJ45) RS232 Connector IN and OUT Power connector DC 12V RS485... -
Page 10: Power On Initial Configuration
PTZ980 Operating Manual DIGIMIC Connect the video switcher and the desired number of cameras to a power source. Use only suitable cables and plugs. Connect the cameras to the video switcher (IN) using a matching SDI cable - camera 1 to output 1, camera 2 to output 2, and so on. -
Page 11: Video Output
PTZ980 Operating Manual DIGIMIC Video Output Video Output Video Output Video Output 1) Video Output from LAN 1) Video Output from LAN 1) Video Output from LAN 1) Video Output from LAN Webpage Login: Open your browser and enter the cameras default IP address 192.168.5.163 192.168.5.163 192.168.5.163 into the address 192.168.5.163... -
Page 12: Upside Down Mount Step
PTZ980 Operating Manual DIGIMIC 2. 2. 2. 2. Upside down mount Upside down mount Upside down mount step Upside down mount step step step BRÄHLER Systems GmbH T +49 (0)2244 930-0 sales@braehler-systems.com www.braehler-systems.com Auf der Alten Burg 6 F +49 (0)2244 930-450 53639 Königswinter Germany 07.0920 191011 V1.0 BRÄHLER Systems is committed to continually improving its products and so reserves the right to make technical modifications without notice. - Page 13 PTZ980 Operating Manual DIGIMIC BRÄHLER Systems GmbH T +49 (0)2244 930-0 sales@braehler-systems.com www.braehler-systems.com Auf der Alten Burg 6 F +49 (0)2244 930-450 53639 Königswinter Germany 07.0920 191011 V1.0 BRÄHLER Systems is committed to continually improving its products and so reserves the right to make technical modifications without notice.
-
Page 14: Main Features
PTZ980 Operating Manual DIGIMIC Main Features Main Features Main Features Main Features Camera Performance Camera Performance Camera Performance Camera Performance This series camera offers perfect functions, superior performance and rich interfaces. The features include advanced ISP processing algorithms to provide vivid images with a strong sense of depth, high resolution and fantastic color rendition. -
Page 15: Technical Specification
PTZ980 Operating Manual DIGIMIC 3. Multiple network protocol: Multiple network protocol: Support ONVIF, RTSP, RTMP protocols and RTMP push mode, easy to link Multiple network protocol: Multiple network protocol: streaming media server (Wowza, FMS) Technical Specification Technical Specification Technical Specification Technical Specification Model Model... - Page 16 PTZ980 Operating Manual DIGIMIC PTZ Parameter PTZ Parameter PTZ Parameter PTZ Parameter Pan Rotation ±170° Tilt Rotation -30°～+90° Pan Control Speed 0.1 -180°/sec Tilt Control Speed 0.1-80°/sec Preset Speed Pan: 60°/sec, Tilt: 30°/sec Preset Number 255 presets(10 presets by remote controller) Other Parameter Supply Adapter AC110V-AC220V to DC12V/2A...
-
Page 17: Interface Instruction
PTZ980 Operating Manual DIGIMIC I I I I nterface Instruction nterface Instruction nterface Instruction nterface Instruction External Interface External Interface External Interface External Interface External interface of PTZ980: RS232 Input/Output, RS485 Input, Audio Input,3G-SDI Output, HDMI Output, LAN, DC12V Power Interface. - Page 18 PTZ980 Operating Manual DIGIMIC RS-232 Mini-DIN 8-pin Port Definition Port Definition Data Terminal Ready Data Set Ready Transmit Data System Ground Receive Data System Ground IR OUT IR Commander Signal No Connection RS232 (DB9) Port Definition Port Definition Data Carrier Detect Receive Data Transmit Data Data Terminal Ready...
-
Page 19: Bottom Dial Switch
PTZ980 Operating Manual DIGIMIC Bottom Dial Switch Bottom Dial Switch Bottom Dial Switch Bottom Dial Switch Dial Switch setting SW 2 SW 1 Explanation Software Upgrade Mode Working Mode BRÄHLER Systems GmbH T +49 (0)2244 930-0 sales@braehler-systems.com www.braehler-systems.com Auf der Alten Burg 6 F +49 (0)2244 930-450 53639 Königswinter Germany... -
Page 20: Application Instruction
PTZ980 Operating Manual DIGIMIC Application Instruction Application Instruction Application Instruction Application Instruction Video Output Video Output Video Output Video Output Power Power Power Power- - - - On Initial Configuration On Initial Configuration On Initial Configuration On Initial Configuration Connecting the power, camera will have initial configuration, R indicator light will be flashing. When the camera return to the HOME position (middle position for P/T), and lens finish zoom in/out, the auto-testing is finished. -
Page 21: Remote Controller
PTZ980 Operating Manual DIGIMIC Remote Controller Remote Controller Remote Controller Remote Controller Keys Instruction Keys Instruction Keys Instruction Keys Instruction 1. Standby Standby Key Standby Standby After 3S long press, the camera will step into standby mode. Long press 3S again, the camera will self-test again and back to HOME position. -
Page 22: Applications
PTZ980 Operating Manual DIGIMIC 12. Key Combination Functions Key Combination Functions Key Combination Functions Key Combination Functions 1) 【#】+【#】+【#】:Clear all presets 2) 【*】+【#】+【6】:Restore factory defaults 3) 【*】+【#】+【9】:Flip switch 4) 【*】+【#】+Auto: Enter into the aging mode 5) 【*】+【#】+【3】:Menu set to Chinese 6) 【*】+【#】+【4】:Menu set to English 7) 【*】+【#】+Manual: Restore the default user name, 8) 【#】+【#】+【0】:Switch the video format to 1080P60... - Page 23 PTZ980 Operating Manual DIGIMIC ZOOM IN: press “ZOOM +“ key ZOOM OUT: press “ZOOM - ” key Press and hold the key, the camera will keep zooming in or zooming out and stops as soon as the key is released. 4.
- Page 24 PTZ980 Operating Manual DIGIMIC 【*】+【＃】+【F1】:Camera Address No. 1 【*】+【＃】+【F2】:Camera Address No. 2 【*】+【＃】+【F3】:Camera Address No. 3 【*】+【＃】+【F4】:Camera Address No. 4 BRÄHLER Systems GmbH T +49 (0)2244 930-0 sales@braehler-systems.com www.braehler-systems.com Auf der Alten Burg 6 F +49 (0)2244 930-450 53639 Königswinter Germany 07.0920 191011 V1.0 BRÄHLER Systems is committed to continually improving its products and so reserves the right to make technical modifications without notice.
- Page 25 PTZ980 Operating Manual DIGIMIC BRÄHLER Systems GmbH T +49 (0)2244 930-0 sales@braehler-systems.com www.braehler-systems.com Auf der Alten Burg 6 F +49 (0)2244 930-450 53639 Königswinter Germany 07.0920 191011 V1.0 BRÄHLER Systems is committed to continually improving its products and so reserves the right to make technical modifications without notice.
-
Page 26: Menu Setting
PTZ980 Operating Manual DIGIMIC MENU MENU MENU MENU SETTING SETTING SETTING SETTING Main Main Menu Menu Main Main Menu Menu In normal working mode, press 【MENU】key to display the menu, using scroll arrow to point at or highlight the selected items. MENU ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝... -
Page 27: Camera Setting
PTZ980 Operating Manual DIGIMIC SETUP ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ Protocol Auto Visca Address Visca Address Fix [← →]Change [↑↓]Select Value PROTOCOL: VISCA/Pelco-P/Pelco-D/Auto Visca ADDR: VISCA=1~7 Pelco-P=1~255 Pelco-D = 1~255 Baud rate: 2400/4800/9600/115200 Visca Address Fix: On/Off Camera Camera Camera Camera Setting Setting Setting Setting Move the pointer to the (CAMERA) in the Main Menu, click the【HOME】key and enter the (CAMERA) as follow, CAMERA... -
Page 28: Exposure Setting
PTZ980 Operating Manual DIGIMIC EXPOSURE SETTING EXPOSURE SETTING EXPOSURE SETTING EXPOSURE SETTING Move the pointer to the (EXPOSURE) in the Main Menu, click the【HOME】and enter the (EXPOSURE SET) as follow, EXPOSURE ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ Mode Auto Anti-Flicker 50Hz Gain Limit Mode : Auto, Manual, Shutter priority, Iris priority and Brightness priority. EV : On/Off (only available in auto mode) Compensation Level: -7~7 (only available in auto mode when EV is ON) BLC: ON/OFF for options (only available in auto mode) -
Page 29: Color Setting
PTZ980 Operating Manual DIGIMIC COLOR SETTING COLOR SETTING COLOR SETTING COLOR SETTING Move the pointer to the (COLOR) in the Main Menu, click the【HOME】and enter the (COLOR SET) as follow, COLOR ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ WB Mode Auto Saturation [ ← → ]Change [ ↑↓... -
Page 30: Image
PTZ980 Operating Manual DIGIMIC IMAGE IMAGE IMAGE IMAGE Move the pointer to the (IMAGE) in the Menu, click the【HOME】and enter the (IMAGE) as follow, IMAGE ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ Brightness Contrast Sharpness Flip-H Flip-V B&W-Mode Color Gamma Default Brightness: 0~14 Contrast: 0~14 Sharpness: 0~15 Flip-H: On/Off Flip-V: On/Off B&W Mode: color, black/white... -
Page 31: Noise Reduction
PTZ980 Operating Manual DIGIMIC NOISE NOISE REDUCTION REDUCTION NOISE NOISE REDUCTION REDUCTION Move the pointer to the (NOISE REDUCTION) in the Menu, click the 【 HOME 】 and enter the (NOISE REDUCTION) as follow, NOISE REDUCTION ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ NR-2D Auto NR-3D [←... -
Page 32: Video Format
PTZ980 Operating Manual DIGIMIC Video Format Video Format Video Format Video Format Move the pointer to the (Video Format) in the Menu, click the【HOME】and enter the (Video Format) as follow, VIDEO FORMAT ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ 1080P60 1080P50 1080I60 1080I50 1080P30 1080P25 720P60 720P50 720P30 720P25... -
Page 33: Restore Default
PTZ980 Operating Manual DIGIMIC Restore Restore Default Default Restore Restore Default Default Move the pointer to the (RESTORE DEFAULT) in the Main Menu, click the【HOME】and enter the (RESTORE DEFAULT) as follow, RESTORE DEFAULT ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ [← →]Change [↑↓]Select Value Restore default: options: yes/no; after restoring default, the video format won’t be restored. Note: If the address of former remoter is not 1 but another one from 2,3,4, the corresponding camera address will restore to 1 when all parameters or system parameters are restored.
Need help?
Do you have a question about the DIGIMIC PTZ980 and is the answer not in the manual?
Questions and answers