Table of Contents Important Safety Warning ............1 Package Contents ................ 2 Overview ..................2 Installation & Initial Startup ............3 Monitoring Software Installation (For Windows OS) ....4 Trouble Shooting ................4 Specification ................. 5 Thank you for purchasing this UPS. To safely operate this uninterruptible power supply system, please read and follow all instructions carefully.
Important Safety Warning (SAVE THESE INSTRUCTIONS) CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity controlled indoor area free of conductive contaminants. (See the specifications for the acceptable temperature and humidity range.) CAUTION! To reduce the risk of overheating the UPS, do not cover the UPS' cooling vents and avoid exposing the unit to direct sunlight or installing the unit near heat emitting appliances such as space heaters or furnaces.
- Communication cable Overview This compact UPS is to protect your PC data loss from power interruption. This UPS features three LED indicators to display the situation of UPS unit. Front Panel Overview: WalkPower 650/850 WalkPower 1000 WalkPower 2000 ...
Installation & Initial Startup NOTE: Before installation, please make sure nothing inside of package is damaged. protect your equipment from power failure, be sure that power switch must be kept in the “ON” position. Following below steps to install your UPS unit. Placement &...
Monitoring Software Installation (For Windows OS) 1. Insert the included installation CD into CD-ROM or go to the website http://www.power-software-download.com drive and then follow the on-screen instructions. If there no screen shows when inserting the CD after 1 minute, please execute setup.exe for initiating installation software. 2.
Specification MODEL WalkPower 650 WalkPower 850 WalkPower 1000 WalkPower 2000 INPUT Capacity 650 VA / 360 W 850 VA/ 480 W 1000 VA / 600 W 2000 VA / 1200 W Voltage 220/230/240 VAC Voltage Range 162-290 VAC Frequency Range...
Page 9
Manuale base WalkPower 650/850/1000/2000 UPS interattivo alla linea www.itek.it...
Page 10
Indice Importanti avvertenze di sicurezza ............1 Contenuto della confezione ..............2 Panoramica ....................2 Installazione e Impostazioni iniziali ............3 Installazione del software di controllo opzionale (per Windows) ..... 4 Risoluzione dei problemi ................4 Specifiche ....................5 Grazie per aver acquistato un UPS. Affinché questo sistema di alimentazione ininterrotta funzioni correttamente, leggere e seguire attentamente tutte le istruzioni.
Importanti avvertenze di sicurezza (CONSERVARE QUESTE ISTRUZIONI) AVVERTENZA! Per prevenire il rischio d’incendio o scosse elettriche, eseguire l’installazione in un’area a temperatura e umidità controllate, libera da contaminanti conduttivi. (Consultare le specifiche per temperatura e umidità) AVVERTENZA! Evitare di surriscaldare il gruppo di continuità. Non coprire le bocchette di raffreddamento e non esporre l'unità...
Questo UPS compatto ha la funzione di evitare la perdita di dati del PC a causa di interruzioni di corrente Il dispositivo è dotato di tre LED che consentono di controllarne lo stato. Panoramica del pannello anteriore: WalkPower 650/850 WalkPower 1000 WalkPower 2000 ...
Installazione e Impostazioni iniziali NOTA: Prima dell’installazione, accertarsi che nessun componente sia danneggiato. Per proteggere le proprie apparecchiature dalle interruzioni di corrente, accertarsi che l’interruttore d’accensione sia in posizione “ON”. Per installare il gruppo UPS seguire le istruzioni. Posizionamento&conservazione Installare l’UPS in un’area protetta, libera da accumuli di polvere e adeguatamente ventilata.
Installazione del software di controllo opzionale (per Windows) 1. Inserire il CD d’installazione accluso alla confezione nell’unità CD-ROM o visitare il sito web http://www.power-software-download.com per il drive e seguire le istruzioni a video. Se, dopo un minuto dall’inserimento del CD, non dovesse apparire nessuna schermata, avviare setup.exe per dare inizio all’installazione del software.
Specifiche MODELLO WalkPower 650 WalkPower 850 WalkPower 1000 WalkPower 2000 ENTRATA Capacità 650 VA / 360 W 850 VA / 480 W 1000 VA / 600 W 2000 VA / 1200 W Tensione 220/230/240 VAC Range di tensione 162-290 VAC...
Need help?
Do you have a question about the WalkPower 650 and is the answer not in the manual?
Questions and answers