Page 1
Maserati-smart key-2016- Help File This help file basically includes 4 parts: Function, Operation, Attention, and Reference. Function 1. The backup immodata: please refer to the "Operation" to backup immodata, after that program and delete key can be proceed; 2. Add smart key: to program smart card, add key and all key lost have the same operation;...
Page 2
the rear seat(see below). The latter needs to dismantle from the trunk audio position,then you will see the onboard computer. 2. Onboard computer appearance and dismantle/read eight feet chip (95640):...
Page 3
3. Backup immodata (as shown below) a. Connect K518ISE main host to KPROG adapter, and connect 12V power supply (must use K518ISE dedicated power supply); b. Weld the eight feet chip (95640) on the "E-01 board"; c. Click the menu to start backing up the data. d.
Page 4
Note: If you can not read data with the KPROG adapter, you can use a programmer to read and copy the data into the K518ISE specified folder, the path: K518 -> file -> feature_553 4. Add / delete key a. Please follow the system prompts.
Page 5
3. For the new Maserati models, in the bottom of the pole position has a "knob" as shown below, cars without this knob belong to the old system before 2016. Reference Chip model: Dedicated smart card PIN code requirement: Dismantle/read the onboard computer to get PIN code (Please refer to the "Operation"...