Advertisement
Quick Links
Advertisement
Summary of Contents for GEECARE Bottle Care
- Page 1 Bottle Care/ NP188I Instructions for Use...
- Page 2 Basic Functions Smart base functions ① 24 H constant temperature Connected to power, the constant the best brewing temperature can be realized and any II. Introduction for Each Part of Smart Baby Bottle temperature is possible. The constant feeding temperature, the infant can be fed at any time.
- Page 3 III. Application Methods ① Touch and hold On-Off key for 3 s to all indicators lighted with vibration to be the norm starting. ② In case of no indicator lighting for starting, it maybe due to low power, please connect the power, and then cannot be normally used. Connection method of power base Connect power cable to power ①...
- Page 4 2. In case of necessity of resetting the brewing temperature, the temperature can be set at relevant site in mobile APP end after the baby bottle connected to mobile blue tooth; or the brewing temperature can be set through the milk powder QR scanning at mobile APP Charger end.
- Page 5 show in green. Then the baby bottle will start the constant temperature mode to continuously [Sterilization by Boiling] Put the cleaned parts into boiling control the water in baby bottle to the temperature suitable for brewing milk powder. The water to boil for 5 min. temperature in brewing mode under default state shall be set between 45 °...
- Page 6 APP Application Methods Constant Temperature Mode Switch Install APP The users can freely switch between Milk Drinking Mode and Brewing Mode according Scan the QR code below, or download Smart Baby Bottle APP in APP Store or Myapp. to needs. (The default mode in first use is brewing mode) V.
- Page 7 Precautions for Use of Baby Bottle and Nipple VII. Cleaning Methods for Bottle and Nipple (Do Not Disassemble the Base for Do not use sharp object to poke the nipple hole and vent valve. Cleaning) In order to keep the best use function of baby bottle and nipple, please change in every In order to ensure the health, please make be sure to clean before the first use and boil in two month.
- Page 8 Product Specifications Why Bluetooth cannot be connected? Product Name Bottle Care Firstly connect the baby bottle to power to exclude the situation of low battery; check whether the started the mobile Bluetooth, enter the Bluetooth connection in APP interface Product type NP188I of Smart Bottle, click the shaking mobile icon to search the device and connect;...
- Page 9 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Need help?
Do you have a question about the Bottle Care and is the answer not in the manual?
Questions and answers