GBRacing BA12-6-GBR-SET Fitting Instructions

FITTING INSTRUCTIONS
TO BE FITTED BY A QUALIFIED TECHNICIAN
PADDOCK STAND BOBBINS All Models
THIS SHEET INCLUDES FITTING INSTRUCTIONS FOR THE FOLLOWING PARTS:
Part Nos. BA12-6-GBR-SET / BA12-8-GBR-SET / BA12-10-GBR-SET / BA12-10-1-5-GBR-SET / BA12-6-RSV4-GBR-SET
PADDOCK STAND / BOBBIN SET
PART NO. BA12-6-GBR-SET
1 Assemble M6 x 40mm Bolt & M6 Washer fthrough the moulded bobbin.
2 Tighten bolts to swing arm boss, 8 Nm.
DO NOT OVERTIGHTEN
PADDOCK STAND / BOBBIN SET
PART NO. BA12-8-GBR-SET
1 Assemble M8 x 40mm Bolt through the moulded bobbin.
2 Tighten bolts to swing arm boss, 8 Nm.
DO NOT OVERTIGHTEN
PADDOCK STAND / BOBBIN SET
PART NO. BA12-10-GBR-SET
1 Assemble the M10 Stainless Steel bolt through the moulded bobbin and the Black Anodised Bush.
2 Tighten bolts to the swing arm boss, 8 N/m.
DO NOT OVERTIGHTEN.
PADDOCK STAND / BOBBIN SET
PART NO. BA12-10-1-5-GBR-SET
1 Assemble the M10 Stainless Steel bolt through the moulded bobbin and the Black Anodised Bush.
2 Tighten bolts to the swing arm boss, 8 N/m. DO NOT OVERTIGHTEN.
www.GBRacing.eu
DO NOT use these products unless you agree to our Terms & Conditions, as shown on our paperwork and website. If you do not agree, please return the product(s) to your dealer for a refund.
(1) Assemble M6 x 40mm Bolt & M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
Fitting Instructions
(1) Assemble M6 x 40mm Bolt & M6 Washer
To be fitted by a qualified Technician
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
(1) Assemble M8 x 40mm Bolt thru moulded 1 off M6 Washer
1 off M6 Washer
bobbin.
Do not overtighten.
1 off M6 x 40 Bolts
1 off M6 x 40 Bolts
(2) Tighten bolts to swing arm boss , 8 N/m.
2 x M6 x 40 Bolts
Do not overtighten.
1 x M6 Washer
1 off M6 Washer
BA12-6-GBR
1 off M6 x 40 Bolts
BA12-6-GBR
1 off M8 x 40 Bolts
2 x M8 x 40 Bolt
Fitting Instructions
Fitting Instructions
To be fitted by a qualified Technician
To be fitted by a qualified Technician
1 off Moulded Paddock stand/bobbin
1 off Moulded Paddock stand/bobbin
(1) Assemble M6 x 40mm Bolt & M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
BA12-8-GBR
thru moulded bobbin.
thru moulded bobbin.
BA12-6-GBR
(2) Tighten bolts to swing arm boss , 8 N/m.
(2) Tighten bolts to swing arm boss , 8 N/m.
Fitting Instructions
Do not overtighten.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
To be fitted by a qualified Technician
(1) Assemble M8 x 40mm Bolt thru moulded
bobbin.
M10
(1) Assemble M6 x 40mm Bolt & M6 Washer
Bush (2) Tighten bolts to swing arm boss , 8 N/m.
thru moulded bobbin.
Do not overtighten.
(2) Tighten bolts to swing arm boss , 8 N/m.
1 off M6 Washer
Do not overtighten.
1 off M6 Washer
1 off M6 x 40 Bolts
1 off M6 x 40 Bolts
1 off M8 x 40 Bolts
1 off Moulded Paddock stand/bobbin
1 off M6 Washer
BA12-6-GBR
1 off M6 x 40 Bolts
M10 Bush Moulded Bobbin
BA12-6-GBR
1 off Moulded Paddock stand/bobbin
BA12-8-GBR
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off Moulded Paddock stand/bobbin
1 off Moulded Paddock stand/bobbin 1 x Moulded Paddock Stand / Bobbin
1 x Moulded Paddock Stand / Bobbin
Moulded M10 x 1.25P x
Bobbin 40mm - 8 Nm
1 off Moulded Paddock stand/bobbin
M10 x 1.5P x
40mm - 8 Nm
To
(1)
To be f
thr
(2)
(1) Asse
bobbin.
Do
1
(2) Tight
Do not o
BA12-6-G
1 off M
BA12-
1 off M8 x 4
T
BA12-8-GBR
BA12-6-GBR
To be f
To b
(1) Asse
bobbin.
(2) Tight
(1) A
thru
Do not o
(2) T
Do n
1 o
1 off M8 x 4
BA12-6-G
1 off M6
BA12-6
BA12-8-GBR
BA12-6-GBR