Advertisement
Advertisement
Table of Contents
Summary of Contents for Assurelink HOMEKIT
- Page 1 HOME INSTALLATION GUIDE SMART ELDERLY CARE HOMEKIT...
- Page 2 What’s in the box? Gateway Temperature & Humidity Sensor ×1 ×1 Motion Sensor ×4 Door Sensor ×2 Transmitter For bedpad ×1 Bed Pad ×1 Network Cable Velcro Pads For gateway For gateway & sensors ×1 ×24 Double-Size Magnet Power Plug For door sensor For gateway ×2...
- Page 3 How to Install Gateway Connect network Cable Connect power Cable RF Signal Network Power Button Reset Power cable Network cable Bed Pad Plug transmitter into connector inside bed pad side pocket Switch on transmitter and ensure red light flashes Cover transmitter inside side pocket Press and hold bed pad for at least 15 seconds to activate transmitter Place bed pad on a mattress at shoulder or hip level...
- Page 4 Temperature & Humidity Sensor Slide to open battery cover Insert 2 AAA batteries Velcro pad Wall mount hole AAA batteries ×2 Temperature & humidity sensor should be installed at a well-ventilated indoor location Motion Sensor Slide to open battery cover Insert 2 AAA batteries AAA batteries ×2 Wall mount...
- Page 5 Door Sensor Slide to open battery cover Insert 2 AAA batteries Velcro pad AAA batteries ×2 Install the main part of sensor at the opening side of the door Install the small part on the door frame closely to the main part with less than 1cm distance Double-sized magnet can be used to line up with the main sensor.
- Page 6 Where to put Gateway Near the Internet port 4 Motion Sensor In the living room In the kitchen In the toilet In the bathroom 2 Door Sensor At the main door At the back door Temperature & Humidity Sensor Temperature & humidity sensor should be installed at a well-ventilated indoor location Bed Pad...
- Page 7 Gateway Reset Reset Please follow below steps to reset the gateway if your App account does not connect. Ensure Internet and power cable is connected to gateway Use the end of a paperclip to press the reset button at the back of gateway Press and hold for 5 second to reset the internet and account setting Reconnect Internet and power cable after the...
Need help?
Do you have a question about the HOMEKIT and is the answer not in the manual?
Questions and answers