1. Manuals
  2. Brands
  3. AFJ Instruments Manuals
  4. Test Equipment
  5. FFT 3010
  6. Operating manual

AFJ Instruments FFT 3010 Operating Manual

Emi test receiver
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATING MANUAL
EMI Test Receiver
FFT 3010 9 kHz ÷ 30 MHz
REVISION LEVEL 1.6
© AFJ Instruments 2019
1
AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FFT 3010 and is the answer not in the manual?

Questions and answers

Summary of Contents for AFJ Instruments FFT 3010

  • Page 1 OPERATING MANUAL EMI Test Receiver FFT 3010 9 kHz ÷ 30 MHz REVISION LEVEL 1.6 © AFJ Instruments 2019 AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 2: Table Of Contents

    C.2.2.1 • STAND ALONE USAGE..................... 21 C.2.2.2 • REMOTE CONTROL USAGE ..................... 23 C.2.2.3 • RECOVER OF SERVER SOFTWARE AUTOMATIC START…………………………………….…………27 C.2.2.4 • RECOVER OF CLIENT SOFTWARE AUTOMATIC START ........... 33 AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 3 E.1 • REPORT BOX .......................... 79 E.2 • GENERATE A REPORT ......................80 SECTION F: TROUBLESHOOTING ......................85 F.1 • MANUAL INSTALLATION OF SQL SERVER 2008 ..............85 AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 4: Afj Fft 3010 Emi Test Receiver

    Troubleshooting STATEMENT OF COMPLIANCE • The AFJ FFT 3010 EMI receiver is designed and built in accordance with CISPR Publication 16-1-1: “Specification for radio disturbance and immunity measuring apparatus and methods - Part 1: Radio disturbance and immunity measuring apparatus”.

  • Page 5: Return Procedure

    Do not cover the ventilation holes. A distance of about 20 cm must to be maintained between the rear panel of FFT 3010 and any wall and about 5 cm between the sides of FFT 3010 and any equipment or walls.
  • Page 6 - Part 1: General requirements - IEC 61326-1 Class B (Emission) - IEC 61326-1 (Immunity, laboratory) - Low Voltage Equipment Directive (2006/95/EC) and EN 61010-1 (“Safety of Electrical Measuring Apparatus”). AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 7: Section A: Rf Emission Testing And Fft-Based Receivers

    − Antenna − Tests Sites All commercial standards refer to CISPR 16-1-1 systems. The EMI receiver is the key element of either conducted or radiated emission measurements. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 8: Cispr 16-1-1 Test Receiver

    DC to 3 GHz is subdivided into many sub bands with a bandwidth of FFT- band each. Every sub band is digitally down-converted to the baseband and the sub bands are processed sequentially. The block diagram is shown in Figure A.2. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 9 (also as a digital filter to model the instrument time constant). The detailed architecture diagram is shown in Figure A.3. Fig. A.3: FFT-based test receiver architecture diagram AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 10: Bandwidths

    A receiver is calibrated using pulses of defined impulse area, spectral density and repetition rate. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 11 As an example, most emission standards follow the simple procedure in Figure A.5. Fig. A.5: Flow chart for use of detectors AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 12: Overload Factor

    The system noise floor is the receiver noise plus the losses imposed by the transducer or antenna factor and connecting cables. In practice, the limiting performance is usually found at the top end of the radiated test around 1÷3 GHz. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 13: Section B: Fft 3010 General Information

    This Section contains a general description of the AFJ FFT 3010 EMI receiver, including: associated and optional accessories, equipment specifications and safety precautions. REFER TO MANUAL. THIS MANUAL IS AN INTEGRAL PART OF THE FFT 3010 EMI RECEIVER. THE SAFETY RULES AND PRECAUTIONS IN THE MANUAL MUST BE OBSERVED. AFJ INSTRUMENTS AND THEIR REPRESENTATIVES ACCEPT NO RESPONSIBILITY FOR DAMAGES TO PERSONS AND EQUIPMENT AS RESULTS OF NON-OBSERVATION OF THE RULES PRECAUTIONS IN THIS MANUAL.

  • Page 14: Usage Of External Pulse Limiter / Attenuator

    B.2 • USAGE OF EXTERNAL PULSE LIMITER / ATTENUATOR High spikes produced by either LISN output or power supply transient noises, could damage the input stage of EMI receiver. FFT 3010 receiver maximum allowed RF input is +127 dBµV in CW 50 Ω coaxial systems.

  • Page 15: Product Structure

    The modular approach followed, enables the user to customize the system configuration according to his specific needs: − Model FFT 3010, is suitable for measurements across the CISPR 16-1-1 frequency bands A/B, from 9 kHz to 30 MHz; − Model FFT 3030, is suitable for measurements across the CISPR 16-1-1 frequency bandwidth A/B/C from 9kHz to 300 MHz;...

  • Page 16: Related Documents

    9 kHz to 1 GHz. Specifications for ancillary apparatus are included for: artificial mains networks, current and voltage probes and coupling units for current injection on cables. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 17 AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 18: Fft 3010 Front Panel Controls And Indicators

    2 – RF OUT: Internal signal generator output. Test signal range +50 dBμV to +95 dBμV for the whole frequency range 9 kHz to 30 MHz. 3 – RF IN: N-type 50Ω input connector for AFJ FFT 3010 series EMI Test Receiver with CISPR Band A, B and f = 9 kHz ÷ 30 MHz.

  • Page 19: Fft 3010 Rear Panel Connections

    Note: ALWAYS leave sufficient space behind the instrument to allow enough air circulation. Do not cover the ventilation holes. A distance of about 20 cm must to be kept between the rear panel of FFT 3010 receiver and any wall. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 20: Section C: System Installation

    Connecting the receiver to the power line: please use the supplied power cord for connecting the FFT 3010 receiver to your public power supply. The power supply must have an earth safety wire. Please check the earth connection on your power outlet before you connect and turn on your AFJ FFT 3010 Test receiver.

  • Page 21: Connection Procedure

    Once connected to external keyboard, mouse and monitor output (VGA/DVI) for standalone usage, a working version of the operating software is already installed on the PC integrated in the AFJ FFT 3010 receiver. The operating software consists of two parts: the server and the client software.
  • Page 22 Fig. C.5: FFT 3010 receiver IP address setting The IP address of AFJ FFT 3010 receiver is set by default to 127.0.0.1 and it does not need to be modified by the end user. TEST button allows to check the status of the communication between the equipment and the PC integrated inside with the indication of system information (Fig.

  • Page 23: Remote Control Usage

    FFT 3010 in the measurement set-up, be connected to a common ground. Connect the receiver power cord to a grounded outlet, too. Connect via LAN-Ethernet the FFT 3010 to an external remote control PC through either a UTP Category 5 cross cable or a standard Ethernet LAN 10/100 MB cable.
  • Page 24 Now click Close to exit the installation procedure. Note: nevertheless the equipment is remotely controlled by an external PC, the AFJ Local Database is always located on PC integrated in the FFT 3010 receiver with WINDOWS 7 Embedded OS at the following path (Fig. C.13): C:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA\...
  • Page 25 Once the server software has completed the hardware configuration of FFT 3010 receiver (see paragraph C.2.2.1), in order to run the FFT 3010 client software on the external remote control PC you have just to start it either by double clicking the AFJ_FFT 3010 blue icon on the Windows desktop or as an alternative, selecting Start =>...
  • Page 26 Limited or no connectivity warning: anyhow the communication between PC and receiver is active and running properly (Fig. C.19). Fig. C.19: Limited or no connectivity warning indication AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 27: Recover Of Server Software Automatic Start

    C.2.2.3 • RECOVER OF SERVER SOFTWARE AUTOMATIC START To recover the automatic start condition of the server software of FFT 3010 receiver, please follows the next steps: STEP 1 – In the PC integrated in the equipment, please open Control Panel -> System and Security -> Administrative tools ->Task Scheduler and Delete the old FFT3010Server task (Fig.
  • Page 28 Proceed clicking on Change User or Group option (Fig. C.22). Fig. C.22: Tab General configuration Proceed clicking on Advanced option (Fig. C.23). Fig. C.23: Advanced option selection AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 29 Proceed clicking on Find Now and select Administrators on Search results section (Fig. C.24). Fig. C.24: PC Administrators configuration In the following window confirm with OK (Fig. C.25). Fig. C.25: PC Administrators confirmation AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 30 STEP 5 – In Create Task window please select Tab Actions and click on New…. to create a new action (Fig. C.27). Fig. C.27: New Action creation AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 31 In the following window (Fig. C.28) select from the list of the available actions Start a program. Click on Browse… and select the file at the path C:\Users\utente\Local\Server\AFJ_R3300_Server.exe In Start in (optional) specify the directory C:\Users\utente\Local\Server\ and confirm with OK. Fig. C.28: New Action configuration AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 32 STEP 7 – In Create Task window please select Tab Settings, select Allow task to be run on demand and If running does not end when request force it to stop checkboxes. Confirm with OK (Fig. C.30). Fig. C.30: New Settings configuration AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 33: Recover Of Client Software Automatic Start

    C.2.2.4 • RECOVER OF CLIENT SOFTWARE AUTOMATIC START To recover the automatic start condition of the client software of FFT 3010 receiver, it is necessary to create a basic task to run the FFT3010 client software at the start-up of the operative system.
  • Page 34 STEP 3 – In Create Basic Task Wizard window please insert the task name and then click Next (Fig. C.33). Fig. C.33: Create Basic Task Wizard window AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 35 STEP 5 – In Create Basic Task Wizard window please choose Start a program option in the Action panel and then click Next (Fig. C.35). Fig. C.35: Action window AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 36 Fig. C.36: Start a Program window STEP – Please browse C:\Program Files (x86)\AFJ\AFJ FFT3010\ folder, select AFJ_R3310_RECEIVER.exe application and then click Open (Fig. C.37). Fig. C.37: Browse window AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 37 STEP 9 – In Create Basic Task Wizard window please select Finish panel, verify the Name, Trigger and Action fields, select Open the Properties dialog for this task when I click Finish option and then click Finish (Fig. C.39). Fig. C.39: Finish window AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 38 Select Run with highest privileges (Fig. C.40). Fig. C.40: General tab STEP 11 – Please select Triggers tab and click on Edit button to modify trigger settings (Fig. C.41). Fig. C.41: Triggers tab AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 39 StartClient Properties dialog box (Fig. C.42). Fig. C.42: Edit Trigger dialog box STEP 13 – Please select Actions tab and verify the status according to Fig. C.43. Fig. C.43: Actions tab AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 40 (Fig. C.44). Fig. C.44: Conditions tab STEP 15 – Please select Settings tab and verify the options according to Fig. C.45. Fig. C.45: Settings tab AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 41 Scheduler application, the new StartClient task is added but Status is set to Ready according to Fig. C.47. Please execute Run in the right panel to modify the status. Fig. C.47: Status settings AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 42 STEP 18 – Right now the StartClient task has the proper status of Running (Fig. C.48). Fig. C.48: Status of Running for StartClient task AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 43: Section D: Operating Instructions

    D.1 • START OF THE APPLICATION When the operating software is running, it shows the Setup box of the FFT 3010 EMI Receiver (Fig. D.1). This screen, with its five options Setup, Run Test, Analyze, Generator and Report, constitutes the so-called cockpit.

  • Page 44: The Setup Box

    D.2 • THE SETUP BOX The Fig. D.2 shows the Setup box of the FFT 3010 EMI Receiver. Fig. D.2: FFT 3010 Receiver setup window The upper portion of Setup window is labeled Workspace and is filled with default data you can easily change to fit your own needs.
  • Page 45 Note 2: The software is able to manage *.txt files with American indication (comma to separate thousands; dot to separate decimals), please leave unchanged the international settings of the PC with default configuration. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 46: Operating Modes, Limits And Scan Traces

    The limits must be selected in the Limit section (in the left-lower part of Setup box, see Fig. D.8). Fig. D.8: Selection of limits in the Limit section Filter Mode This optional feature is especially suited to perform CISPR 15 Insertion Loss Measurements. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 47 Van Der Hoofden Test FFT 3010 receiver is automatically set according to the requirements IEC 62493 Ed. 2.0:2015-03 standard (Assessment of lighting equipment related to human exposure to electromagnetic fields) (Fig. D.9) for measurements with Van Der Hoofden Test Head model AFJ VDH 30.

  • Page 48: Max Hold And System Automation

    Fig. D.12: Setup System Automation section for an AFJ LISN choice For AFJ FFT 3010 EMI Receiver you can add either an AFJ LISN LS16C/10 or an AFJ LISN LT32C/10. Then you can choose the LISN LINE to measure. Possible choices are: - Line 1 or neutral for LISN LS16C/10 (single-phase ISN);...
  • Page 49 L3 (for LT32C only) HOLD SET 2 enable MAX Hold and set the repetition number to 2 (defined by user) HOLD RST disable Max hold AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 50: An Example Of Sya Script File

    WR OP Operator Name2 WR CO Conditions2 WR SP Specifications2 WR NO Test note2 WRITE232 COM1 *idn? WAIT 2000 SWEEP Of course mode tests can be added to the file. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 51: Limit Editor (Tools Menu)

    D.2.4 • LIMIT EDITOR (TOOLS MENU) AFJ FFT 3010 EMI Receiver software comes already with many measurements limits according to emission standards CISPR/EN 55011, 14, 15, 19, 22 (both Average and Quasi Peak, Group 1/2, Class A/B where applicable). In case of need, you can create your own limit.
  • Page 52 In the Import Limit an XML file can be loaded and filtered according to Limit Name and its Description. After highlighting a Limit, press Import to import it onto your database. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 53: Single Test Settings

    Enable Subrange Line: with this option enabled, a red vertical (dotted) separation line at the crossings of the subranges appears in the graphic during run-time. If you now click on the Run Test label you see the effect on your diagram. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 54: Input Device Calibration Editor (Tools Menu)

    Reorder or Remove point. Fig. D.22: Edit Input Device Calibration window You can press the Save button to store your data, the following message appears (Fig. 23): AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 55 An example of a such file is here: 270000000 15.51 275000000 15.22 280000000 15.24 285000000 14.98 14.87 etc. 290000000 D.24: Input Device Calibration parameters for an external 20 dB Attenuator AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 56: Tools Menu

    D.26: Commands of the Tools menu GTEM Correlation storing correlation parameters GTEM (Gigahertz Transverse Electromagnetic Cell) in comparison with OATS (Open Area Test Site) for radiated emissions measurements. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 57 ); electric field Ecap(f) (V/m) With Generate Report you create automatically the report with all the information about measurement with VDH 30. Fig. D.28: Van Der Hoofden Test Result AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 58: Customize (Tools Menu)

    If you answer “Yes” then the other flag for “Automatic Limit Curve Color Setting” will be checked. If you answer “No” and “Don’t ask anymore” then the flag for “Ask for Automatic Limit Curve Color Setting” will be unchecked. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 59: Options (Tools Menu)

    Note: The Peak Search will be effective only if a Limit is selected in the Single Test Settings part of the cockpit (Fig. D.33): Fig. D.33: Limit selection on Single Test Settings section AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 60 Default Plot Screenshot Size is 710 х 425 pixel but it is recommended to set it at least double (1420 x 850 pixel). Tools => Options => Language Selection between English (default) and Chinese. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 61: Gtem Correlation (Optional)

    'Points' window push 'Load from File' and then select the file with correction factors values inside. Into the table and on the diagram correction factor points will appear. Push save to store all the data. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 62 Using the software in demo mode it is possible to load two correction factors called “Correction_h” and “Correction_v”, already loaded by default into the software (Fig. D.35). Fig. D.35: Load correction factor from text file AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 63 Y and Z axis), taking care to select into the frequency table on SET UP window “GTEM” type on Antenna/Probe column. From main form select 'Tools->GTEM Correlation' (Fig. D.38). AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 64 Correlation Output, choose among Electric field horizontal/vertical polarization, Total radiated power, Maximum electric field horizontal/vertical polarization. Once you have added all parameters, press Start GTEM Correlation button to start calculation, then Close to exit. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 65: Manage Admin Password

    After updating the Password when accessing the Input Device Calibration Editor the User / Password Message Box will appear (Fig. D.43). Fig. D.43: User / Password Message Box AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 66: Run Test Box

    The result of the actual measurement is shown in Fig. D. 45, as seen from the Run Test box. Fig. D.45: A frequency spectrum of conducted emission measurement from 150 kHz to 30 MHz AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 67: Run Test Sections

    Fig. D.47: Peak Search table of the actual spectrum, ordered by Distance From Limit Note: A sort by either Frequency or Amplitude (in ascendant order, from the lowest value) is also possible from the Sort By drop-down menu. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 68 D.49 A); 2) after you release it a blue rectangle appears and the area is zoomed (Fig. D.49 B): → Fig. D.49: Manual Zoom on Emission Spectrum AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 69 (check Show) in your main Run Test window (see Fig. D.49), and you can add your Test Note about the current performed test. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 70 (light-blue color) that behaves similarly at all, so enabling to make a second measurement. The two markers on the spectrum appear as apparent in Fig. D.57. Fig. D.57: Markers MK1 (red) and MK2 (light blue) in a spectrum AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 71 After saving the measurement data, it will be possible to load it and calculate again the F factor with the possibility to generate a test report using the software tool described at the paragraph D.2.7. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 72: Analyze Box

    The initial appearance of the Analyze Box is apparent from Fig. D.60. Fig. D.60: The Analyze Test Box AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 73 Pressing Show Settings button for the selected test, a window with all information on run test opens (Fig. D.63). Fig. D.63: Test Settings for a Load Test AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 74 Generate Report. It enables to easily create a report of the loaded test. After a few instants a window opens with your customized test report (See § E.2 for more details and information). AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 75 Pushing “Add Row” button, it is possible to add manually other new points on the frequencies list during the real time measurement (Fig. D.70). AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 76: The Manual Settings Section

    In the Manual Settings section you can choose up to three from five available detectors, by flagging their names. There is a sketch of the Analyze section with three detectors (Peak, QPeak, C_AVG) at Fig. D.72. Fig. D.72: Manual Settings of detectors, attenuators, etc. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 77: The Real Time Visualization

    FFT band. Pushing “ALL” button, the real time measurement will be performed into the whole frequency range. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 78: Cw Generator Box

    CW Generator is the so-called Internal Signal Generator Box. It is depicted in Fig. D.74. Fig. D.74: CW Generator Box The CW Generator has to be activated by checking flag RF ON after setting the frequency and the amplitude. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 79: Section E: Report And Application Notes

    In the Report box you can Load Test, make a Peak Search, Reset Zoom (if any) and Generate Report (see next paragraph E.2). Load Test will open the well-known Test Management table (Fig. E.2). Fig. E.2: Test Management in Report box AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 80: Generate A Report

    After a few instants a window opens with your customized test report (Fig. E.5). Here you can make many actions as Export Export as an Excel, PDF and Word file AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 81 PDF, Excel and Word file are allowed (Fig. E.7). Fig. E.7: Navigation, Print, Print layout, Export as Excel / PDF / Word file Report can be opened in Word (any version), see next pages. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 82 AFJ FFT3010 Report Report Test: Test Number 493 WorkSpace: Workspace1 AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 83 56.0 -3.2 1.527MHz C_AVG 42.3 42.3 46.0 -3.7 15 15.582MHz QPeak 56.0 56.0 60.0 -4.0 432kHz QPeak 40.0 40.0 57.2 -17.2 432kHz C_AVG 28.1 28.1 47.2 -19.1 AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 84 Attenuator: 0 dB Time: Antenna/Probe: - none - Cable: - none - Amplifier/Atten.: - none - Instrument Summary Model Serial Calibration Calibration Number Date FFT 3310 SE0J7U 6/12/2012 6/12/2013 AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

  • Page 85: Section F: Troubleshooting

    SQLEXPR_x64_ENU.EXE (if your operative system is Windows 64 bit). Follow these below instructions to install SQL Server 2008 Express: First window of installation program SQL Server 2008. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 86 In the next window, click on the first option “New Sql stand-alone installation or add features to an existing installation” (Fig. F.3). Fig. F.3: SQL 2008 Express: second installation window (SQL Server Installation Center: Installation) Go on by clicking “Ok” AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 87 Fig. F.5: SQL 2008 Express: fourth installation window (Product Key) Please go on by clicking on Next. (Fig. F.5). The Setup Support Files window now opens (Fig. F.6). AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 88 Please go on by clicking on Next. Select all the features you need to install (at least choose Database Engine Services). Please go on by clicking on Next. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 89 Important: In the following screen please select the option Default Instance. Then go on by clicking on Next. Fig. F.9: SQL 2008 Express: sixth installation window (Feature Selection) Please go on by clicking on Next. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 90 Fig. F.11: SQL 2008 Express: eighth installation window (Server Configuration) Leave selected the default option Windows Authentication mode and press Add Current User. Please go on by clicking on Next. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 91 Here select the user discretional options, then click on Next. Fig. F.13: SQL 2008 Express: tenth installation window (Error and Usage Reporting) Please go on by clicking on Next. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 92 Fig. F.15: SQL 2008 Express: twelfth installation window (Ready to Install) Wait for the process of installation. At the end you will see the following screen: Fig. F.16: SQL 2008 Express: thirteenth installation window (Complete Installation) AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 93 Now install AFJ Receiver Software Version 4.10 by double click on the file AFJ_FFT3010Setup.msi only. Note: If you attempt to install it launching the file setup.exe the error of first screen appears again. AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...
  • Page 94 Manufacturer Declaration Of Conformity; 6 Workspace; 44; 45; 64 Markers; 70; 76 —X— Max Hold; 48; 77 XML; 51; 52 —N— —Z— NVM; 20 Zoom; 68; 75 —O— Operating Modes; 46 AFJ FFT 3010 EMI RECEIVER – Operating Manual – rev. 1.6 / 2019-01...

Table of Contents