Summary of Contents for DeeJay's Event Rentals INFLATABLE SCREEN
- Page 1 INFLATABLE SCREEN Instructions as of 3/22/17 SYSTEM COMPONENTS: (1) Inflatable Movie Screen with storage bag (8) Tie down straps (attached to screen) (1) Air blower (4) Steel twist-in stakes (1) Tarp 1...
- Page 2 INFLATABLE SCREEN SETUP STEP 1: UNROLL SCREEN AND UNCOIL TETHERS Unroll screen on grass or tarp. Unfold the screen so it sits like a clamshell with the white projection surface on the inside (so it doesn’t touch the ground). Identify the top and bottom of the screen.
- Page 3 INFLATABLE SCREEN SETUP STEP 2: SECURE STAKES AND TETHERS Place stakes in ground roughly 10 feet from the corners of screen at 135 degree angles. For 9’, 12’, and 16’ screens, clip the tethers from the corners of the screen to the stakes. For the 20’ screen, tie ends of tethers to stake, preferrably using a clove hitch knot.
- Page 4 INFLATABLE SCREEN SETUP STEP 3: ATTACH AIR BLOWER TO SCREEN Attach the air blower to the intake sleeve on the side of the inflatable frame using the cinch cord. Plug in the air blower using an extension cord (not provided with Home systems).
- Page 5 HOME INFLATABLE SCREEN SETUP STEP 4: INFLATE SCREEN Close air vent(s) by zipping closed. Turn on the air blower’s power switch. The Open Air Screen should inflate in less than a minute. The air blower should remain on to continuously maintain air pres- sure during use.
- Page 6 chart below for your specific system size. Place on small table. Overhead View of The projector’s zoom function will allow for image size adjustment system and console after the projector has been placed. setup Air blower DISTANCE TO PLACE CINBOX™ CONSOLE FROM CENTER OF SCREEN BY SYSTEM SIZE: OVERHEAD VIEW OF SCREEN PLACEMENT –...
-
Page 7: Image Alignment
STEP 5: SETUP OTHER DEVICES PROJECTOR; Place PROJECTOR on small table. Plug Power Cord in. DVD PLAYER or LAPTOP; Plug HDMI Cable into HDMI port of DVD PLAYER or LAPTOP. Plug other end into PROJECTOR. Plug Power Cord in. SPEAKERS; Place SPEAKERS on stands on each side of the screen. - Page 8 STEP 6: SYSTEM TAKEDOWN PROJECTOR Power down the projector; press power button and follow instructions to allow projector bulb to cool down BEFORE unplugging. Failure to do so could result in bulb damage and replacement fees. SPEAKERS Turn all volume knobs down on speakers and turn to OFF position before unplugging cables. SCREEN Turn off air blower and guide screen down so that it unfolds in half (top to bottom, as shown in screen setup).
Need help?
Do you have a question about the INFLATABLE SCREEN and is the answer not in the manual?
Questions and answers