Page 2
Introduction EX120-TP: 10/100/1000BASE-T(X) Ethernet Extender over Coaxial Cable with Power over coaxial (Master) EX120-RP: 10/100/1000BASE-T(X) Ethernet Extender over Coaxial Cable with IEEE 802.3at, PoE+ Ethernet port (Slave) Installation This chapter gives step-by-step installation guide for the PoE Extender over Coaxial. Selecting a Site for the Equipment As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or...
Page 3
Connecting to Power 1. Connect the supplied AC to DC power adaptor with a power voltage of 54Vdc to the DC-Jack on the device, and then attach the plug into a standard AC outlet. 2. The Ethernet port of EX120-RP supports IEEE802.3at PoE/PSE. Caution : EX120-TP is a PoC (power over coaxial) transmitter.
Page 4
LED Indicator The LED indicators give you instant feedback on status of the device: Front panel LEDs Status Indication Lights on Power on Power off Lights on A valid network connection established Blinking Data transmitting or receiving Lights off Not Linking Lights on A valid coaxial connection established COAX...
Need help?
Do you have a question about the EX120 Series and is the answer not in the manual?
Questions and answers