Advertisement
Quick Links
Darcy - Tower with 2 Doors
Assembly Instructions - Please keep for future reference
413/4783
Dimensions
Width - 61.7 cm
Depth - 42 cm
Height - 190.5 cm
Important
- Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 0845 6400 800
Issue 1 - 03/06/2015
1
Advertisement
Summary of Contents for Delano Darcy 413/4783
- Page 1 Darcy - Tower with 2 Doors Assembly Instructions - Please keep for future reference 413/4783 Dimensions Width - 61.7 cm Depth - 42 cm Height - 190.5 cm Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0845 6400 800 Issue 1 - 03/06/2015...
- Page 2 Safety and Care Advice Important - Please read these instructions fully before starting assemb ly • Check you have all the • Assemble on a soft level • Dispose of all packaging components and tools listed on surface to avoid damaging the carefully and responsibly.
- Page 3 If you have damaged or missing components Component - Panels call the Customer Helpline: 0845 6400 800 Please check you have all the panels listed below Door 10 Rear top (134.4 x 57.4cm) (136.5 x 59.3cm) Left side Right side (181.4 x 41.8cm) (181.4 x 41.8cm) Flap...
- Page 4 Components - Fittings Please check you have all the fittings listed below Wooden dowel x 24 Hinge plate x 5 Door hinge x 5 (8x35) Locking nut x 8 ( 15x13) 4x13mm Screw x 10 Cap x 8 Hexagon bolt x 4 Metal dowel x 8 Cap x 4 (7x50)
- Page 5 Assembly Instructions Step 1 Step 1 a: Inserting dowels and locking nuts Insert locking nuts into the left side panel Insert wooden dowels into the left side panel Screw metal dowels Insert shelf support into the left side panel WARNING! Please wear goggles or protective...
- Page 6 Assembly Instructions Step 1 Step 2 a: Inserting dowels and locking nuts Insert locking nuts into the right side panel Insert wooden dowels into the right side panel Screw metal dowels Insert shelf support into the right side panel WARNING! Please wear goggles or protective...
- Page 7 Assembly Instructions Step 1 Step 2 Step 1 Step 3 a: Inserting dowels and locking nuts Screw metal dowels into the top Insert shelf support into the top. Insert locking nuts Finished into the horizontal partition front edge Insert wooden dowels into the horizontal partition Rotate horizontal partition.
- Page 8 Assembly Instructions Step 1 Step 2 Step 1 Step 4 a: Inserting dowels Insert wooden dowels into the long plinth Repeat with short plinth WARNING! Please wear goggles or protective eyewear whilst hammering dowels in place. Step 1 Step 2 Step 1 Step 5 Fitting hinges to flap...
- Page 9 Assembly Instructions Step 6 Attaching glass Attach front glass into the door using glass clamp & screw WARNING! We do not recommend the use of power drill/ drivers for inserting screws, as this could damage the unit. Only use hand screwdrivers.
- Page 10 Assembly Instructions Step 8 a: Attaching plinth Attach feet to the long plinth Attach long plinth to the short plinth WARNING! Please wear goggles or protective eyewear whilst hammering sliders in place. b: Attaching plinth Attach long plinth & short plinth to the bottom Step 9...
- Page 11 Assembly Instructions Step 10 Attaching panels Attach left side panel to the horizontal partition Attach right side panel to the horizontal partition Use the allen key turn locking nuts clockwise to lock Cover locking nut with caps Finished front edge Step 11 Attaching top Attach top...
- Page 12 Assembly Instructions Step 12 Inserting rear panel Slide rear panels into the grooves of sides and top Step 13 Attaching bottom Attach bottom to the sides using hexagon bolt & allen key Cover bolts with caps...
- Page 13 Assembly Instructions Step 14 Fixing back panels Fix rear panel to back of tower using stabilizer Attach washers using screw IMPORTANT ! Cabinet MUST be “square” when rear panel is attached. Place wall bracket onto the assembly as shown. Mark hole with a punch approximately in the middle of the slot in the bracket and fix the...
- Page 14 Assembly Instructions Step 15 Fixing to wall It is recommended that the tower is fixed to a wall. With help, move tower into position. Mark fixing hole on wall and remove tower. Drill a hole on the marking on the wall. Reposition tower.
- Page 15 Assembly Instructions Step 16 For door to open from the left, attach hinge plates on the right. Cover the mounting holes on the left with caps For door to open from the right, attach hinge plates on the left. Cover the mounting holes on the right with caps...
-
Page 16: Hinge Adjustment
Assembly Instructions Step 17 If door is set to open from right, please proceed to step 18. Hanging door a: slot door hinges onto ‘hinge plates’. b: Tighten screw shown to lock hinges in position. If necessary, adjust hinges, to adjust position of door. - Page 17 Assembly Instructions Step 18 Hanging door a: slot door hinges onto ‘hinge plates’. b: Tighten screw shown to lock hinges in position. If necessary, adjust hinges, to adjust position of door. Hinge adjustment Fix flap stay to the flap using screws Insert shelf If necessary, adjust hinges, to adjust...
Need help?
Do you have a question about the Darcy 413/4783 and is the answer not in the manual?
Questions and answers