Table of Contents 1 Description....................4 2 Safety conditions..................5 3 Connectors and control elements............6 4 Start of operation..................7 5 Device menu....................9 5.1 Time..........................10 5.2 Network........................12 5.3 Display........................14 5.4 Configurations......................15 5.5 Info..........................20 5.6 Administration......................21 5.6.1 Change password.................... 22 5.6.2 Restore to default settings................23 5.6.3 Restart device....................
Page 3
Manufacturer reserves the right to make modifications in order to improve device operation. PXM Marek Żupnik sp.k. Podłęże 654 tel. +48 12 385 83 06 32-003 Podłęże mail: info@pxm.pl Rev.1-0 BDO register number 000005972 www.pxm.pl 14.05.2020...
The PX703 is equipped with a 10.1” TFT touch screen with a resolution of 1280 x 800px. The device has a plastic and aluminum housing, has been designed for...
Safety conditions PX703 Touch Panel 10" is a device powered with safe voltage 12 – 24V DC or with the use of PoE (Power over Ethernet) in IEEE 802.3af standard, however, during its installation and use it is essential to follow the below safety rules: 1.
Start of operation After starting, the panel displays the start page with a list of available devices: list of available controllers in the network with which the user can connect, the device name is displayed button that opens the menu with the device settings NOTE! To make available devices appear in the start page, they must first be added to the Configurations menu (see section 5.4 Configurations).
Page 8
– the user is logged in to the controller and the configuration has • been downloaded from the controller to the PX703 – you can open the configuration and control it • yellow – the device is in the network and the connection has been...
Device menu After entering the menu, a window containing the following tiles will appear : network settings display settings clock settings configuration device and administration return to the management manufacturer tools main window (drivers) information...
5.1 Time To change the date and time, enter Time settings, in addition in this menu you can configure the NTP server and select the time zone. The Time settings window looks like this : To change the date and time, click on left side of the Time settings window.
Page 11
In the Time settings window you can enable the NTP server and specify two servers from which the Touch Panel 10" will obtain the date and time (PX703 must be connected to the internet). NTP servers can be found at: https://www.ntppool.org/. Below the NTP setting is the zone selection.
NOTE! When making any changes to the settings, save them by clicking the button in the upper right corner of the screen, you can also exit without saving them by selecting the button in the upper left corner of the screen. 5.2 Network After selecting the network settings, a window will appear in which you can enter the network settings manually or enable automatic addressing...
Page 13
DHCP enabled – all networks settings are downloaded automatically b) DHCP off – network settings are set manually NOTE! Pleas note that PX703 must be on the same network as the drivers to connected to.
5.3 Display The Display tile is responsible for changing the screen brightness, screen saver settings (on / off, brightness to be set and the time after which the brightness change will be introduced). This menu is also responsible for changing the interface language (Polish / English). NOTE! When making any changes to the settings, save them by clicking the button in the upper right corner of the screen, you can also exit without...
5.4 Configurations To add a configuration (controller), go to the Configurations tile, and then select the button in the bottom right corner of the screen. To edit the configuration (controller), press the button , after selecting it the SN, Login and Password fields will be activated and they will be editable. Enter the device SN (serial number), Login and Password of the user to be connected to the controller.
Page 16
After entering the login data for the controller, press the edit button again (to deactivate the option of editing the fields) then press the save changes button in the upper right corner of the screen.
Page 17
(login and password) are correct, in the upper right corner of the configuration edition a green inscription connected appears. In case PX703 cannot connect to the controller, a red not found message will appear.
Page 18
You can also delete all configurations by selecting the Administration tile and then Remove all configurations (see section 5.6 Administration). NOTE! Only the configuration with the connected status is visible on the main screen.
Page 19
The configuration, which is marked with a blue border, is treated as the default one and is started after switching on the device, provided the controller is available. NOTE! To change the default configuration, press it to highlight it – save your selection with the button...
5.5 Info After clicking the Info tile a window will appear containing : • Device – device name • Serial number Software version • System version • Uptime • Manufacturer information •...
5.6 Administration The Administration tab looks like this: deleting all configurations change password saved in the device's memory (access to all settings) restart the device go to advanced settings restoring defaults settings...
5.6.1 Change password It allows you to create or change an existing password to edit settings in PX703. To protect the settings with a password, slide the switch Use password, enter the default password (“admin”) and a new password twice.
NOTE! When making any changes to the settings, save them by clicking the button in the upper right corner of the screen, you can also exit without saving them by selecting the button in the upper left corner of the screen. 5.6.2 Restore to default settings Resets the device to default settings (the device displays the message ”Are you sure you want to restore to defaults settings?”)
5.6.4 Remove all configurations Deletes all configurations saved in the device’s memory (the device displays the message ”Are you sure you want to remove all configs?”)
5.6.5 Advanced tools Goes to the next menu (the device displays message “Are you sure?”). The following options are available in the Advanced tools menu: Change version – selection of the software version to be used • • Factory Defaults – full factory reset including the whole application reset Reboot device –...
Structure of the application window After selecting the driver from the main panel window, the control screen opens. The application window consists of the following items: controlling the zone scene master speed control master disabled enable scene program status selection of the currently displayed return to the window zone...
Configuration Configuration sent to the device consists of zones (displayed in PX703 as separate desktops) to which the given user has access. After selecting the controller fro the main menu, Touch Panel 10" downloads the configuration for the logged in user (selected in the Configurations menu).
7.1 Scene Scene can be masterable – you can modify its master when the symbol is displayed in the upper left corner. Clicking on a scene switches its state. The tile color indicates the currently state of the scene (navy blue when it is disabled and blue when it is enabled).
7.3 Status Displayed as a tile that does not respond to clicking. The tile color indicates the current state of the selected status of the controller: navy blue, when it is disabled • blue, when it is enabled • 7.4 Events Event with no value: Tile which sends an appropriate event to the controller every time it is pressed on.
To turn on Recovery mode, hold down the button at the back in the middle of the device when starting the PX703. After starting this mode, the Advanced Tools window will be launched, in Advanced Tools menu the available options are: Reset Password –...
(http://pxm.pl/) 10 WWW interface PX703 can be managed from a web browser. To do this, go to http://device_IP_address/ (e.g. 192.168.1.100), the IP address can be checked by clicking the Network tile on the device. When logging in to the website, enter the user and password (the user is always ADMIN, and the password is the same as for security settings, admin by default).
Page 33
Being on the device management page, you can set exactly the same parameters as using the setting, i.e.: • Time and Date – change the time, date, zone or NTP server settings Ethernet Network – network setting such as DHCP, IP, mask, gate, DNS •...
Page 34
Display – change of brightness, screen saver settings and language • change Management – enable / disable and change the security password, • update the software, reset settings to default, delete all configurations, search for devices and restart the device...
After mounting the box in the wall, you can proceed to install the screen. First, connect the cabling, and then apply the PX703 to the box with its upper part, so that the tooth protruding from the screen enters the hole in the metal box.
Page 36
Then, paying attention to the fact that the tooth is in the hole, press the bottom of the screen towards the metal housing until you hear a characteristic click.
Page 37
The screen mounded in this way is ready for use.
Page 38
In order to dismantle the screen, insert the included angle into the hole under the screen and press it firmly.
Page 39
When the metal angle is inserted under the screen and pressed down, swing the bottom of the screen down and pull it towards you.
TX+ TX- VCK+ SYNC REMOTE 1 2 3 4 6 7 8 10 11 12 14 15 16 0-10V OUT 0-10V IN PX340 controller with DHCP server enabled PX703 touch panel with DHCP enabled (power from an external power supply)
Page 41
14 15 16 0-10V OUT 0-10V IN PX340 controller IP: 192.168.1.101 Mask: 255.255.255.0 Gate: 192.168.1.100 PX703 touch panel IP: 192.168.1.102 Mask: 255.255.255.0 Gate: 192.168.1.100 c) connecting the device directly to the controller (static IP addresses) 12 - 24V DC power supply...
14 Technical data type PX703 display TFT 10.1” 16:9 screen resolution 1280 x 800px 12 – 24VDC or PoE (Power over Ethernet power supply IEEE 802.3af)* housing aluminum / plastic 1 x USB connectors 1 x Ethernet (PoE) 1 x reset button DHCP protocol support max.
Page 44
Podłęże, 14.05.2020 DECLARATION OF CONFORMITY PXM Marek Żupnik spółka komandytowa Podłęże 654, 32-003 Podłęże we declare that our product: Product name: Touch Panel 10" Product code: PX703 meets the requirements of the following standards, as well as harmonised standards: PN-EN IEC 63000:2019-01...
Need help?
Do you have a question about the PX703 and is the answer not in the manual?
Questions and answers