Identifying Specific Installation Locations; Identifying Known Rf Absorbers/Reflectors/Interference Sources; Installing The Iap - Dell W-IAP228 Installation Manual

CAUTION: EU Statement:
Lower power radio LAN product operating in 2.4 GHz and 5 GHz bands. Please refer to the
User Guide
Produit réseau local radio basse puissance operant dans la bande fréquence 2.4 GHz et 5 GHz. Merci de vous referrer au
Networking W-Series Instant User Guide
Low Power FunkLAN Produkt, das im 2.4 GHz und im 5 GHz Band arbeitet. Weitere Informationen bezlüglich Einschränkungen
finden Sie im
Apparati Radio LAN a bassa Potenza, operanti a 2.4 GHz e 5 GHz. Fare riferimento alla
Guide
per avere informazioni detagliate sulle restrizioni.
NOTE: Dell in compliance with governmental requirements, has designed the W-IAP228 access point such that only authorized
network administrators can change configuration settings. For IAP configuration information, refer to the
Series Instant Quick Start Guide
CAUTION: Access points are radio transmission devices and as such are subject to governmental regulation. Network
administrators responsible for the configuration and operation of access points must comply with local broadcast regulations.
Specifically, access points must use channel assignments appropriate to the location in which the access point will be used.

Identifying Specific Installation Locations

Use the AP placement map generated by Dell's RF Plan software application to determine the proper installation
location(s). Each location should be as close as possible to the center of the intended coverage area and should be
free from obstructions or obvious sources of interference. These RF absorbers/reflectors/interference sources will
impact RF propagation and should have been accounted for during the planning phase and adjusted for in the RF
plan.

Identifying Known RF Absorbers/Reflectors/Interference Sources

Identifying known RF absorbers, reflectors, and interference sources while in the field during the installation
phase is critical. Make sure that these sources are taken into consideration when you attach an AP to its fixed
location. Examples of sources that degrade RF performance include:
Cement and brick

Objects that contain water

Metal

Microwave ovens

Wireless phones and headsets


Installing the IAP

NOTE: Service to all Dell Networking W-Series products should be performed by trained service personnel only.
Dell Networking W-IAP228 Wireless Instant Access Point | Installation Guide
for details on restrictions.
Dell Networking W-Series Instant User Guide.
Dell Networking W-Series Instant User Guide
and
pour les details des restrictions.
Dell Networking W-Series Instant
Dell Networking W-Series Instant User
Dell Networking W-
.
Dell
5