User Guide Freedom Power Pack Contents Introduction ................................. 2 Do’s and Don’ts ................................3 2.1 Ensure the battery is physically secure ......................... 3 2.2 Do not penetrate the battery enclosure ........................ 3 2.3 Maintain an acceptable temperature range ......................3 2.4 Avoid repeated shock and vibration ........................
As with all batteries, you should consider the mechanical and environmental conditions that you intend to operate the battery in to maximise overall performance and achieve the longest battery life. LBS offer these general guidelines; however, you should seek LBS advice or that of a qualified electrical tradesperson if you are in doubt.
2.3 Maintain an acceptable temperature range Like all batteries, LBS batteries operate and perform the best as well as last the longest in a cool and stable temperature environment of between 10 C and 25 C.
User Guide Freedom Power Pack 2.4 Avoid repeated shock and vibration Whilst the battery is robustly constructed and protected in an aluminum enclosure, it is not designed to operate continuously in high shock or high vibration environments. Normal use in a 4WD environment is acceptable and the battery has been designed in accordance with these expected conditions.
User Guide Freedom Power Pack 3.0 User Guide Your lithium Freedom Power Pack is a portable 50Ah lithium battery with convenient plugs to provide power for a variety of purposes. Like all electronic devices you need to treat your appliance carefully and not expose to excessive temperatures, water, dirt or undue rough handling.
User Guide Freedom Power Pack When fully charged the battery will be at 13.3-13.5V. Discontinue use when the battery is approximately 11V. It will automatically cut out at approximately 10V. 3.2 Voltmeter The voltmeter with the circular ring of LED’s will give the pack voltage and an indication on how full the battery is.
User Guide Freedom Power Pack 4.0 Troubleshooting Guide When I turn the voltmeter on there is nothing on the screen. The battery is most likely completely discharged. Connect a charger and give the battery a good charge Note: if you leave your battery for an extended period you will need to use a charger that automatically provide charge without sensing any voltage from the battery.
ADD ON: Baintech Watt Meter Take the guesswork out of how much power your solar panels are generating. The Baintech Watt meter once connected will give you real time information on: • Current (Amps/A) • Voltage (Volts/V) • Power (Watts/W) BAINTUFF 180WATT SOLAR BLANKET CTEK LITHIUM BATTERY...