Instructions Of Use; Maintenance And Cleaning; Environment Protection - Jata electro MZ586 Instructions Of Use

INSTRUCTIONS OF USE

• Keep pressed the tilt support pusher (2) and lift up the support (3) Fig. A)
• To place the bowl (9) in the swivel base (10) keep pressed the swivel base and turn the bowl to
the indicated direction
• Place the rods into the holes.
• VERY IMPORTANT: The rods that have a ring in the edge must be placed in the hole with
bigger diameter of the blender showed with the letter "R". If it is not like this, there is risk
of dough spill.
MIXING RODS (7): For liquid mixes, creams, egg whites, etc.
KNEADING RODS (8): They are designed to knead pastry and light dough.
• Place the rods in the corresponding holes pressing and turning round in order to have them
correctly fixed. Use always the rods together. Never use different rods together.
• Keep pressed the pusher (2) and move down the tilt support (3) (Fig. A).
• Select the speed with the selector (5).
• It is advisable to begin at the lowest speed (position 1) to then increase the speed to highest speed
(position 6). However, and depending on the texture of the food, you may use the highest position
from the start.
• Use the slide knob (11) to move the bowl in one or in other direction. Keep it pressed downwards
and move in one or other direction. With this action you will get a homogeneous dough (Fig B).
• Once you have finished, set the speed selector (5) to "0" position and unplug it from the mains.
• Keep pressed the support pusher (2) and lift it up.
• To take out the rods press the release button (4).
• To remove the bowl keep hold the turning base and turn the bowl in the indicated direction

MAINTENANCE AND CLEANING

• Before you proceed to cleaning, make sure the appliance is unplugged from the mains.
• The accessories may be cleaned with soap and water. Try to do it as soon as you finish using it,
because dry texture of some foods are difficult to take out.
• Clean the body of the blender with a cloth dampened in water.
• Do not use abrasive or chemical products, such as metallic scourers, which may deteriorate the
surfaces of the appliance.

ENVIRONMENT PROTECTION

• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.
ATTENTION
• Lisez attentivement cette notice avant de mettre l'appareil
en fonctionnement et conservez-la pour vous y reporter
au besoin.
.
FRANÇAIS
10
.