Schiit Modius Owner's Manual page 3

CONTROLS
1 Input Selector. Press this button to cycle
through the inputs.
2 Input Indicators. Indicates which input you have
selected, from USB to AES. Also functions as a
power indicator. If all LEDs are out, check that you
have power to the Modius.
Pretty straightforward, right?
OUTPUTS
You can use both the balanced XLR and single-
ended RCA outputs of Modius at the same time.
They are completely independent.
1
TROUBLESHOOTING
"Draws too much power" error. You'll need to use
additional power. Disconnect Modius from your
source, then connect the wall-wart to the Power
Input using the USB Micro cable. The Modius will
then report as a 0mA USB device. You'll need
another cable to connect to your source.
No sound? Make sure Modius is selected in
Control Panel (Windows) or System Prefs (Mac)
AND in your player software.
Note: Modius does not have drivers for non-UAC2
compliant systems (Windows versions prior to 10).
2
030M001100 5VDC/0.5A