Mono-Stereo Switch - Tely ACE User Manual

Active noise reduction (anr) headset system
Table of Contents

Advertisement

TELY ACE ANR Headset User Guide
If the Auto-Off switch (12) is in the OFF
position, power to the controller will stay on
until manually turned off.
If the Auto-Off switch (12) is in the ON
position, the controller will save battery
power automatically and turn off -
 after 5 minutes if the controller receives
no radio, intercom, AUX or Bluetooth
signals or
 after 30 minutes if the controller
receives no radio or intercom signals
but does receive AUX or Bluetooth
signals.

Mono-Stereo Switch

The Mono-Stereo switch (13) is not intended
for frequent use being located inside and
below the battery compartment. Care must
be taken when moving the switch.
With the switch in the Mono (M) position all
signals are delivered to both left and right
speakers monaurally.
With the switch in the Stereo (S) position
AUX and Bluetooth stereo signals will be
heard in stereo and the radio or intercom
signals will be heard in both ears. This
experience may be different depending on
the radio or intercom system in use.
14

Advertisement

Table of Contents
loading

Related Products for Tely ACE

Table of Contents